3 A步降开关稳压器

The L7981 device is a step-down switching regulator with a 3.7 A (minimum) current limited embedded Power MOSFET, so it is able to deliver up to 3 A current to the load depending on the application conditions.\n\n The input voltage can range from 4.5 V to 28 V, while the output voltage can be set st • 3 A DC output current \n• 4.5 V to 28 V input voltage \n• Output voltage adjustable from 0.6 V \n• 250 kHz switching frequency, programmable up to 1 MHz \n• Internal soft-start and enable \n• Low dropout operation: 100% duty cycle \n• Voltage feed-forward \n• Zero load current operation \n• Ov;

3 A step-down switching regulator

文件：1.33943 Mbytes Page：44 Pages

3 A step-down switching regulator

文件：1.32187 Mbytes Page：44 Pages

封装/外壳：8-VFDFN 裸露焊盘 功能：降压 包装：卷带（TR） 描述：IC REG BUCK ADJ 3A 8VFQFPN 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：8-VFDFN 裸露焊盘 功能：降压 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG BUCK ADJ 3A 8VFQFPN 集成电路（IC） DC DC 开关稳压器

3 A step-down switching regulator

文件：1.32187 Mbytes Page：44 Pages

3 A step-down switching regulator

文件：1.33943 Mbytes Page：44 Pages

3 A step-down switching regulator

文件：1.32187 Mbytes Page：44 Pages

3 A step-down switching regulator

文件：1.32187 Mbytes Page：44 Pages

Controller for the LC Dot Matrix Graphic Display?

Overview The LC7981 is a controller LSI for the liquid crystal dot matrix graphic display. It stores display data sent from the 8-bit microcomputer in the display RAM attached externally and generates dot matrix LC drive signals.

Up to 11.3 Gb/s 3.3V: VCSEL, DML, EML Laser/Modulator Driver Family

GENERAL DESCRIPTION: The VSC7980, VSC7981 and VSC7982 are low power 10Gb/s laser and modulator drivers for both Telecommunications and Data Communications. FEATURES: +3.3V Power Supply for Low Power Duty Cycle, Output Modulation and Output Bias Level Controls VSC7980: 200mW Typ

150mA Low-Noise LDO in SC-70

文件：227.66 Kbytes Page：10 Pages