Applications

 Telephone lines

 DSL lines

Features

 Three stage protection

 Superior to diode or TVS only based designs

 Screw terminal blocks

 Industrial grade weatherproof die cast

aluminum enclosure with mounting

brackets

Description

The ALW-DSLS is HyperLink’s outdoor version of its HGLN-D2-DT protector. This high

performance 3-stage lightning protector provides superior protection for Telephone and

DSL lines. Shared phone lines carry the ring voltage for standard telephones. The unit

protects against both differential and common mode transients.

The first stage is comprised of a differential gas discharge tube. Stage two is a pair of

current limiting series resistors and the final stage is a low capacitance diode array. The

use of three terminal differential gas discharge tubes provides superior protection

against surges. The second stage series resistance limits the power dissipation of the

fast diode clamp array in the third stage. This allows time for the slower but higher

power gas tubes to flash over. The diode array clamps the leading edge of fast transients

to safe levels until the high power gas tubes turn on. This eliminates the damaging

leading edge spike that single stage gas tube protectors let leak through. The diode array’s low capacitance assures that the

high speed signals will not be degraded by the suppressor. The 3-stage design can handle higher-level transients than a

protector that uses only diodes.

For more complete surge protection of data lines, the use of two units is recommended, one at

each end of the line.

Industrial Grade Weatherproof Enclosure

This protector features an industrial grade die cast aluminum enclosure with gasketed cover

and concealed mounting holes. It includes an aluminum mounting kit and hardware. PG16

cable glands are provided on the enclosure as well as an external ground clamp to provide a

tie point for earth ground.