Applications

 10/100/1000 Base-T Ethernet Equipment

 Intra-building Cable Runs

 Wireless Access Points & Bridges

 Wireless Client Adapters

 IP Cameras

Features

 CAT6, CAT6A, CAT5e and CAT5 compatibility

 GR-1089 Intra-Building rated

 Cable shield isolated from safety ground

 Power-Over-Ethernet (PoE+) compatible

 Impact and weather resistant enclosure with

locking hinged cover

Description

The L-Com AL-CAT6AHPJW Lightning Protector provides superior lightning and surge protection for indoor

10/100/1000 Base-T Ethernet networks. The unit has low line to line and line to ground capacitance to minimize

distortion of high-speed signals. The design provides protection for both common and differential mode surges.

The AL-CAT6AHPJW has been designed to meet the GR-1089 Intra-Building surge protection requirements for

10/100/1000 Base-T Ethernet lines. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE)

devices. This device supports PoE mode A and B for power. The AL-CAT6AHPJW isolates the cable shield from the

safety ground. This minimizes the chance of a ground loop being

introduced.

The AL-CAT6AHPJW features shielded RJ45 jacks with isolation from the

safety ground. This minimizes the chance for ground loops when using

shielded cable.

For maximum protection from lightning on long cable runs, two ALCAT6AHPJW's can be used - one at each end of the cable.

The compact weather resistant housing features a lockable hinged cover and mounting holes are provided on the

rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and are removable.