The Wire Mapper Pro™ Model CA7028

is a hand-held structured cable mapping

and troubleshooting tester designed

for use on UTP, STP, FTP and SSTP

cabling equipped with RJ-45 connectors

and wired to either TIA 568A/B (ISO

11801 and EN 50137), USOC or ISDN

specifications. It detects open circuit

pairs, shorts, crossed wires, crossed

pairs, reversed pairs, split pairs and

shield faults.

In the event of opens and shorts, the

Model CA7028 uses TDR technology

to indicate if the fault is at the near

end or the remote end of the cable,

or if it is somewhere in between. It will

then indicate the distance to the fault.

The Model CA7028 has the ability to

measure and indicate the length of the

cable under test, using a Vp (Velocity

of Propagation) set by the user, from

a built-in library or manually. It will

measure and report the length of all

four pairs of wires in the cable under

test. It also generates an audible tone

that is transmitted into all four pairs on

the cable under test. This can be used

for cable tracing and identification in

conjunction with a tone generator.

The Model CA7028 also has the ability

to identify telephone and data lines.

If the main unit is plugged into an

operational RJ-45 socket, it will give a

continuous warning tone and display if

a telephone voltage is present on any

of the pins. If the Service Detect key

is pressed, it will check and display

telephone, 10BaseT, 100Mbit+ and

token ring active service

Features

• Hand-held LAN Cable Mapping

and Troubleshooting Tester

• Indicates all common wiring faults

including split pairs, shorts, opens,

reversed pairs and crossed wires

• Unique graphical and digital display

of fault information and length

• Indicates distances to opens and

shorts and identifies location

• Display fault location up to 500 ft

(150m) in feet or meters

• Built-in tone generator for tracing

and locating cables

• Built-in service check function to

detect telephone, 10BaseT, 100Mbit+

and token ring

• Visual and audible warning of live

telephone network voltages

• Works with all category cables

• Rugged design weighs less than

12 oz (350g)

• Large high-visibility blue

electroluminescent backlit display

• Complete with remote unit and

mini patch leads

• Active remote identifiers indicates

Pass/Fail at remote end using

Green/Red LED

• Up to 16 unique remote identifiers

available

• Works with TIA 568A/B, USOC and

ISDN wiring schemes

Applications

• Identify LAN wiring faults

• Find distances (feet or meters)

to opens and shorts

• Test patch cords

• Test for active service

• Trace cable locations

• Measure cable length

• Map network layout