PRODUCT IN BRIEF

ADDERLink DV104T is a high

performance digital video extender and

splitter that enables you to locate your

critical play out hardware in a secure and

temperature controlled environment away

from the display point environment whilst

maintaining the same user experience.

• Proof of Display (P.O.D.)

• 50 meter extension distance

• Plug and Play

• Two video inputs, four video outputs

• 2x4 HD Digital matrix

• Line powered receivers

ATURES

Two video inputs, four video output

splitter and extender

The ALDV104 is an intelligent non

blocking cross point switch and extender.

dynamically via the web interface or

controlled by a 3rd party control system.

Proof of display via IP network

The unit determines if the entire system

is operating correctly and video is visible

on the monitors. It can detect if video is

present from the player and whether the

cables to the monitors are attached and

the monitor is turned on. This information

is available by an IP socket thus allowing

remote diagnostics and integration into

content management systems.

Source failover

The unit can be set to detect that a video

stream is present at the input. The unit

can be set to automatically switch over to

the second video input if the primary fails.

Security

Security on the web interface is by HTTP

digest authentication (RFC 2617) with

username and password as requested

information.

API for 3rd party integration

The API documentation to control and

receive data from the unit is provided

with the system.

Digital audio

Supports 8 channels of HDMI audio.

Perfect HD Digital Video

The ALDV104T uses an uncompressed

video system where every frame is sent

without loss with resolutions up to 1920

x 1200@60Hz (WUXGA) including

1080p, 720p and 480p resolutions.

50 meters over a single CATx cable

Video, audio and power all pass along a

single CATx cable, providing up to 50m

of extension. Distance can be dependent

upon CATx cable types and the number

of connection breaks for patch panels and

wall plates. See overleaf for details.

Dual head extension

With two inputs, the system is suited to

extending and splitting dual head systems.

power supplies are required

The receivers are designed to be highly

of the power required by competing

systems. Power is supplied along the

CATx cable meaning the support

infrastructure required is minimal.

EDID management

The system has intelligent EDID

management allowing the true

characteristics of the monitor to be

passed back to the computer.

Plug and Play

state so you can plug and play. There is no

need for additinal drivers or software.