Gigabit Ethernet Transceiver with RGMII Support

General Description The KSZ9031RNX is a completely integrated triple-speed (10BASE-T/100BASE-TX/1000BASE-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-Chip 10/100/1000 Mbps Ethernet Transcei

Gigabit Ethernet Transceiver with RGMII Support

Features • Single-Chip 10/100/1000 Mbps Ethernet Transceiver Suitable for IEEE 802.3 Applications • RGMII Timing Supports On-Chip Delay According to RGMII Version 2.0, with Programming Options for External Delay and Making Adjustments and Corrections to TX and RX Timing Paths • RGMII with 3

Gigabit Ethernet Transceiver with RGMII Support

Features • Single-Chip 10/100/1000 Mbps Ethernet Transceiver Suitable for IEEE 802.3 Applications • RGMII Timing Supports On-Chip Delay According to RGMII Version 2.0, with Programming Options for External Delay and Making Adjustments and Corrections to TX and RX Timing Paths • RGMII with 3

Gigabit Ethernet Transceiver with RGMII Support

Features • Single-Chip 10/100/1000 Mbps Ethernet Transceiver Suitable for IEEE 802.3 Applications • RGMII Timing Supports On-Chip Delay According to RGMII Version 2.0, with Programming Options for External Delay and Making Adjustments and Corrections to TX and RX Timing Paths • RGMII with 3

Gigabit Ethernet Transceiver with RGMII Support

Features • Single-Chip 10/100/1000 Mbps Ethernet Transceiver Suitable for IEEE 802.3 Applications • RGMII Timing Supports On-Chip Delay According to RGMII Version 2.0, with Programming Options for External Delay and Making Adjustments and Corrections to TX and RX Timing Paths • RGMII with 3

Gigabit Ethernet Transceiver with RGMII Support

Features • Single-Chip 10/100/1000 Mbps Ethernet Transceiver Suitable for IEEE 802.3 Applications • RGMII Timing Supports On-Chip Delay According to RGMII Version 2.0, with Programming Options for External Delay and Making Adjustments and Corrections to TX and RX Timing Paths • RGMII with 3

Gigabit Ethernet Transceiver with RGMII Support

General Description The KSZ9031RNX is a completely integrated triple-speed (10BASE-T/100BASE-TX/1000BASE-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-Chip 10/100/1000 Mbps Ethernet Transcei

Gigabit Ethernet Transceiver with RGMII Support

Features • Single-Chip 10/100/1000 Mbps Ethernet Transceiver Suitable for IEEE 802.3 Applications • RGMII Timing Supports On-Chip Delay According to RGMII Version 2.0, with Programming Options for External Delay and Making Adjustments and Corrections to TX and RX Timing Paths • RGMII with 3

封装/外壳：48-VFQFN 裸露焊盘 包装：卷带（TR） 描述：IC TRANSCEIVER FULL 4/4 48VQFN 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：48-VFQFN 裸露焊盘 包装：卷带（TR） 描述：IC TRANSCEIVER FULL 4/4 48VQFN 集成电路（IC） 驱动器，接收器，收发器

INSULATED PC SPACERS/SUPPORTS

INSULATED PC SPACERS / SUPPORTS • Board will be electrically insulated, eliminates need for insulating washers • Easy snap-in assembly • No tool required for installation • Designed for .062(1.57) thick boards • One piece design eliminates the need for additional screws and nuts • Slim desig

Piezoelectric force sensors Piezoelectric ring force transducers for tensile and compression forces from 7.5 kN to 1 200 kN

Hall Effect Sensor IC

General Description The APX9031 is an integrated Hall Effect Sensor IC designed for electric commutation of DC brushless motor applications. Even with a reverse voltage protection diode, the APX9031 still can operate at as low as 3 volts. The APX9031 is available in low cost TO-92M3 and SOT-89 pa

Snap Rivets

文件：152.09 Kbytes Page：2 Pages

Snap Rivets

文件：152.09 Kbytes Page：2 Pages