High Voltage High Speed Power Switch Application

High Voltage High Speed Power Switch Application • High Breakdown Voltage : BVCBO=800V • Built-in Free-wheeling Diode makes efficient anti saturation operation • Suitable for half bridge light ballast Applications • No need to interest an hFE value because of low variable storage-time spread

High Voltage High Speed Power Switch Application

High Voltage & High Speed Power Switch Application

High Voltage & High Speed Power Switch Application • Built-in Free-wheeling Diode makes efficient anti saturation operation Suitable for half-bridge light ballast Applications • No need to interest an hFE value because of low variable storage-time spread even though corner spirit • Low base

Silicon NPN Power Transistor

DESCRIPTION · Collector-Emitter Breakdown Voltage -V(BR)CEO= 400V(Min) · Collector-Emitter Saturation Voltage -VCE(sat):= 0.4V(Max) @IC= 0.4A APPLICATIONS · Low frequency amplifier

High Voltage & High Speed Power Switch Application

High Voltage & High Speed Power Switch Application • High breakdown Voltage :BVCBO=800V • Built-in Free-wheeling Diode makes efficient anti saturation operation • Suitable for half bridge light ballast Applications • No need to interest an hFE value because of low variable storage-time spr

High Voltage High Speed Power Switch Application

High Voltage High Speed Power Switch Application • High Breakdown Voltage : BVCBO=800V • Built-in Free-wheeling Diode makes efficient anti saturation operation • Suitable for half bridge light ballast Applications • No need to interest an hFE value because of low variable storage-time spread

封装/外壳：TO-220-3 包装：管件 描述：TRANS NPN 400V 2A TO220-3 分立半导体产品 晶体管 - 双极性晶体管（BJT）- 单个

2.5 V to 5.5 V, 115 uA, Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5330/AD5331/AD5340/AD53411 are single 8-/10-/12- bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 115 μA at 3 V and feature a power-down mode that further reduces the current to 80 nA. The devices incorporate an on-chip output buffer that can drive the

2.5 V to 5.5 V, 230 uA Dual Rail-to-Rail, Voltage Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5302/AD5312/AD5322 are dual 8-, 10-, and 12-bit buffered voltage output DACs in a 10-lead MSOP that operate from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V. Their on-chip output amplifiers allow the outputs to swing rail to-rail with a slew rate of 0.7 V/μs.

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

NTSC LUMINANCE SIGNAL, CHROMA-SIGNAL AND SYNCHRONOUS SIGNAL PROCESSING ICs

Overview The AN5302K and AN5303K are the integrated circuits processing NTSC luminance, chroma and synchronous signals, incoporating the delay line, picture quality compensating circuits. They provide high picture quality and are suitable for high-performance large screen color TV.

Power supply unit for LCDs

Power supply unit for LCDs The BP5302 and BP5302F are DC / DC converter units for supplying power to liquid crystal display (LCD) panels. The ICs supply a negative voltage from a positive power supply. They are available in a single in-line package as an upright (BP5302) or L-shaped lead (BP5302F