Ultra-Low Cost, 139A, 2.7V, 4.9MHz Rail-to-Rail I/O Amplifier

Description The KM7101 is an ultra-low cost, low power, voltage feed back amplifier that is pin compatible to the LMC7101. If a standard pinout is required, use the KM4170. The KM7101 uses only 136µA of supply current and offers no crossover distortion. The input common mode voltage range excee

Ultra-Low Cost, 136µA, 4.9MHz Rail-to-Rail I/O Amplifier

Description\nThe KM7101 is an ultra-low cost, low power, voltage feed back amplifier that is pin compatible to the LMC7101. If a standard pinout is required, use the KM4170. The KM7101 uses only 136µA of supply current and offers no crossover distortion. The input common mode voltage range exceeds t • 136µA supply current\n• 4.9MHz bandwidth\n• Output swings to within 20mV of either rail\n• Input voltage range exceeds the rail by 250mV\n• 5.3V/µs slew rate\n• 16mA output current\n• 21nV/√Hz input voltage noise\n• Directly replaces LMC7101 in single supply applications\n• Available in SOT23-5 pa;

Ultra-Low Cost, 139A, 2.7V, 4.9MHz Rail-to-Rail I/O Amplifier

Description The KM7101 is an ultra-low cost, low power, voltage feed back amplifier that is pin compatible to the LMC7101. If a standard pinout is required, use the KM4170. The KM7101 uses only 136µA of supply current and offers no crossover distortion. The input common mode voltage range excee

Ultra-Low Cost, 139A, 2.7V, 4.9MHz Rail-to-Rail I/O Amplifier

Description The KM7101 is an ultra-low cost, low power, voltage feed back amplifier that is pin compatible to the LMC7101. If a standard pinout is required, use the KM4170. The KM7101 uses only 136µA of supply current and offers no crossover distortion. The input common mode voltage range excee

10mm Adjustable Unshielded IFT Coils

文件：109.73 Kbytes Page：1 Pages

10mm ADJUSTABLE RF COILS (UNSHIELDED)

文件：134.07 Kbytes Page：1 Pages

10mm Adjustable Unshielded IFT Coils

文件：109.73 Kbytes Page：1 Pages

AUTOMOTIVE GLOW PLUG DRIVER

DESCRIPTION The VN710SP is a monolithic device made using STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transients compatibility table). A

Voltage Comparator

文件：115.54 Kbytes Page：10 Pages

Voltage Comparator

文件：115.54 Kbytes Page：10 Pages

Voltage Comparator

文件：115.54 Kbytes Page：10 Pages

Voltage Comparator

文件：115.54 Kbytes Page：10 Pages