ISL9016 is a high performance dual LDO capable of providing

up to 150mA current on each channel. It features a low standby

current and very high PSRR and is stable with output

capacitance of 1µF to 4.7µF with an ESR of up to 200mΩ.

The device integrates a separate enable function for each

output. The quiescent current is typically 49µA when only one

LDO is enabled and typically 80µA when both LDOs are

enabled. When both LDOs are under shutdown condition, the

drawing current is typically less than 1µA.

ISL9016 provides a wide input voltage range from 1.8V to

6.5V. It also has a high PSRR of 80dB at 1kHz and 45dB at

1MHz. ISL9016 also provides output current limit, overheat

protection, reverse current protection, as well as excellent load

transient response.

ISL9016 is offered in a tiny 1.6mmx1.6mm 6 Ld µTDFN

package. Output voltage options are available from 1.2V to

3.3V. Several combinations of voltage outputs are standard

and others may be available upon request.

Features

• Dual Integrated 150mA High Performance LDOs

• High PSRR: 80dB @ 1kHz and 45dB @ 1MHz

• Reverse Current Protection

• Low Quiescent Current

- 49µA (Single LDO Enabled)/80µA (Dual LDOs Enabled)

• Excellent Load Transient Response

• Typically ±0.8 Output Voltage Accuracy

• Low Output Noise: Typically 25µVRMS

• Wide Input Voltage Capability: 1.8V to 6.5V

• Low Dropout Voltage: Typically 120mV @ 150mA

• Separate Enable Control for each LDO

• Stable with 1µF to 4.7µF Ceramic Output Capacitors

• Soft-start to Limit Input Current Surge During Enable

• Current Limit and Overheat Protection

• Tiny 6 Ld 1.6mmx1.6mm µTDFN package

• Pb-free (RoHS Compliant)

Applications

• PDAs, Cell Phones and Smart Phones

• Portable Instruments, MP3/4 Players, PMP, DSC

• Handheld Devices including Medical Handhelds