The ISL78310 is a low dropout voltage, high-current, single

output LDO specified for 1A output current. This part operates

from input voltages down to 2.2V and up to 6V. The part offers

fixed and external resistor adjustable output voltages from 0.8V

to 5V. Custom voltage options are available upon request.

For applications that desire to set the in-rush current to less than

the current limit of the part, or for applications that require

turn-on time control, an external capacitor can be placed on the

soft-start pin for maximum control. A supply-independent

ENABLE signal allows the part to be placed into a low quiescent

current shutdown mode. Sub-micron CMOS process is used for

this product family to deliver best-in-class analog performance

and overall value.

This CMOS LDO consumes significant lower quiescent (ground pin)

current as a function of load over bipolar LDOs, which translates into

higher efficiency and packages with smaller footprints. Quiescent

current is optimized to achieve a very fast load transient response.

The ISL78310 is AEC-Q100 rated. The ISL78310 is rated for the

automotive temperature range (-40°C to +125°C).

Features

• 2.2V to 6V input supply

• 130mV dropout voltage typical (at 1A)

• Fast load transient response

• ±0.2 initial VOUT accuracy

• Adjustable in-rush current limiting

• 58dB typical PSRR

• 63µVRMS output noise at VOUT = 1.8V

• Power-good feature

• 500mV feedback voltage

• Supply-independent 1V enable input threshold

• Short-circuit current protection

• 1A peak reverse current

• Over-temperature shutdown

• Any cap stable with minimum 10µF ceramic

• ±1.8 guaranteed VOUT accuracy for junction temperature

range from -40°C to +125°C

• Available in a 10 Lead DFN package

• Pb-free (RoHS compliant)

• AEC-Q100 qualified

Applications

• Core & I/O power

• Camera modules

• Post regulation of switched supplies

• Radio systems

• Infotainment systems