Low Noise, Low Power, I2C™ Bus, 128 Taps, Wiper Only

The ISL22319 integrates a single digitally controlled potentiometer (DCP) and non-volatile memory on a monolithic CMOS integrated circuit.

The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper. At power up the device recalls the content of the DCP’s IVR to the WR.

Features

• 128 resistor taps

• I2C serial interface

- Two address pins, up to four devices/bus

• Non-volatile storage of wiper position

• Wiper resistance: 70Ω typical @ 3.3V

• Shutdown mode

• Shutdown current 5µA max

• Power supply: 2.7V to 5.5V

• 50kΩ or 10kΩ total resistance

• High reliability

- Endurance: 1,000,000 data changes per bit per register

- Register data retention: 50 years @ T ≤ +55°C

• 8 Ld MSOP

• Pb-free (RoHS compliant)