2 Feature Overview

NLM0011/NLM0010 product features are given here.

Product Features

Contactless Interface

• Physical interface and Anti collision compliant to ISO/ IEC 18000-3 mode 1 (ISO/IEC 15693)

- contactless transmission of data and supply energy

- data rate up to 26.69 kbit/s

- operation frequency: 13.56 MHz

- Anti-collision method complying with ISO/IEC 18000-3 mode 1 with identification rate of up to 50 tags/s

• AFI according ISO/IEC 18000-3 mode 1

• Read / write distance up to 150 cm (influenced by external circuitry i.e. reader and antenna design)

Command Set

• Support of error codes 01H, 0FH, 10H, 12H according to ISO/ IEC 18000-3 mode 1

• If a command is sent to the NLM0011/NLM0010 which has an invalid frame length no response is returned

• Following command set is supported:

- Inventory (command code 01H)

- StayQuiet (command code 02H)

- ReadSingleBlock (command code 20H)

- WriteSingleBlock (command code 21H)

- Select (command code 25H)

- ResetToReady (command code 26H)

- WriteAFI (command code 27H)

- LockAFI (command code 28H)

- WriteByte (custom command - ISO command code A0H; custom embedded command code 90H)

Non Volatile Memory (NVM)

An Infineon EEPROM is used.

• size 576 Bit

• User area 52 bytes, organized in 13 free user blocks

• Each block organized in 4 bytes

• Service area 12 bytes

• Unique chip identification number

• Each block can be permanently locked against overwriting

• EEPROM programming time per page < 4 ms

• EEPROM endurance minimum 100,000 erase/write cycles

• Data retention minimum 10 years

Supply Concept

operation mode dependent:

• in Lighting Operation mode the chip is supplied by external voltage source

- external supply voltage in the range of 3 … 5V

- internal voltage regulator (LDO) is generating a stabilized internal supply

- if external supply voltage is present, then the device cannot be supplied by harvesting energy from the

NFC field