The MA200E12/17 module adapter board offers the following features:

• Dual channel IGBT driver together with 2ED300E17-SFO (detailed description in AN2007-05)

and 2ED300C17-S /-ST EiceDRIVER™

• Electrically and mechanically suitable for EconoDual™ 3 modules family

• Operating temperature (design target) minimum value -40°C

• Different gate resistor values for turning-on and -off are possible

• IGBTs are secured against temporary VCE overvoltages during turn-off (Active Clamping)

• Diodes for IGBT desaturation monitoring implemented (short circuit protection)

• All components, except connectors, are surface mounted devices (SMD) with lead free 260°C

soldering profile

• PCB is designed to fulfil the requirements of IEC61800-5-1, pollution degree 2, overvoltage category III

(creepage – 11 mm)

When the MA200E12/17 is not used with 2ED300E17-SFO adapter board and 2ED300C17-S /-ST

EiceDRIVER™ these following features might be useful:

• Gate-emitter amplifier input resistance is larger than 45 Ω

• Can be used with max. ±20V isolated power supply (due to IGBT short circuit performances a value of

max. +16V is suggested)

• Asymmetric power supply is also allowed e.g. -8 V and +16 V

• Input PWM voltage level should be selected according to power supply voltage level (in the same range

but not higher)