General description

Infineon’ PSoC™ 4 is a scalable and reconfigurable platform architecture for a family of programmable embedded

system controllers with an Arm® Cortex®-M0+ CPU. It combines programmable and reconfigurable analog and

digital blocks with flexible automatic routing. PSoC™ 4100PS is a member of the PSoC™ 4 platform architecture.

It is a combination of a microcontroller with standard communication and timing peripherals, a capacitive

touch-sensing system (CAPSENSE™) with best-in-class performance, programmable general-purpose

continuous-time and switched-capacitor analog blocks, and programmable connectivity

Features

• Programmable analog blocks

- Two dedicated analog-to-digital converters (ADC) including a 12-bit SAR ADC and a 10-bit single-slope ADC

- Four opamps, two low-power comparators, and a flexible 38-channel analog mux to create custom Analog

Front Ends (AFE)

- Two 13-bit voltage DACs

- Two 7-bit current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin

• CAPSENSE™ capacitive sensing

- Infineon’s fourth-generation CAPSENSE™ Sigma-Delta (CSD) providing best-in-class signal-to-noise ratio

(SNR) and water tolerance

- Infineon-supplied software component makes capacitive sensing design easy

- Automatic hardware tuning (SmartSense™)

• Segment LCD drive

- LCD drive supported on all pins (common or segment)

- Operates in Deep-Sleep mode with four bits per pin memory

• Programmable digital peripherals

- Three independent serial communication blocks (SCBs) that are run-time configurable as I2C, SPI or UART

- Eight 16-bit timer/counter/pulse-width modulator (TCPWM) blocks with center-aligned, edge, and

pseudo-random modes

• 32-bit signal processing engine

- Arm® Cortex®-M0+ CPU up to 48 MHz

- Up to 32 KB of flash with read accelerator

- Up to 4 KB of SRAM

- Eight-channel descriptor-based DMA controller

• Low-power operation

- 1.71-V to 5.5-V operation

- Deep-Sleep mode with operational analog and 2.5-µA digital system current

- Watch crystal oscillator (WCO)

• Programmable GPIO pins

- Up to 38 GPIOs that can be used for analog, digital, CAPSENSE™, or LCD functions with programmable drive

modes, strength and slew rates

- Includes eight Smart I/Os to implement pin-level Boolean operations on input and output signals

- 48-pin QFN, 48-pin TQFP, 28-pin SSOP, and 45-ball WLCSP packages