EVAL-M1-05-65D is a complete evaluation board including a 3-phase IPM for motor drive application. The kit

demonstrates Infineon’s IPM technology for motor drives.

Main features of CIPOS™ Micro Intelligent Power Module IRSM515-065 and IRSM505-065 are:

• 3-phase inverter including high voltage gate drivers

• Integrated bootstrap functionality

• Trench FREDFET with RDS(on) of 1.3 Ω @ 25°C

• Under voltage lockout for all channels

• Matched propagation delay for all channels

• Temperature feedback via NTC applicable for IRSM505-065

• Optimized dV/dt for loss and EMI trade off

• 3.3 V logic compatible and advanced input filter

• Possibility to choose single shunt or leg shunt current sensing

• Driver tolerant to negative transient voltage

• Isolation 1900 Vrms, 1min

• Certified by UL file number E252584

The evaluation board characteristics are:

• Nominal input voltage 240 VAC

• 20 – 150 W motor power range without heatsink

• On board EMI filter

• Current sensing for each phase configured by default

• Over current protection

• Sensing of DC-link voltage

• Thermistor output

• Fault diagnostic output

• Measurement test-points compatible to standard oscilloscope probes

• PCB is 90 x 75 mm and has two layers with 35 μm copper each

• RoHS compliant