DESCRIPTION

The IDT72V3686/72V3696/72V36106 are designed to run off a 3.3V supply for exceptionally low-power consumption. These devices are a monolithic, high-speed, low-power, CMOS Triple Bus synchronous (clocked) FIFO memory which supports clock frequencies up to 100 MHz and has read access times as fast as 6.5ns. Two independent 16,384/32,768/65,536 x 36 dual-port SRAM FIFOs on board each chip buffer data between a bidirectional 36-bit bus (Port A) and two unidirectional 18-bit buses (Port B transmits data, Port C receives data.) FIFO data can be read out of Port B and written into Port C using either 18-bit or 9-bit formats with a choice of Big- or Little-Endian configurations.

FEATURES

• Memory storage capacity:

IDT72V3686 – 16,384 x 36 x 2

IDT72V3696 – 32,768 x 36 x 2

IDT72V36106 – 65,536 x 36 x 2

• Clock frequencies up to 100 MHz (6.5ns access time)

• Two independent FIFOs buffer data between one bidirectional 36-bit port and two unidirectional 18-bit ports (Port C receives and Port B transmits)

• 18-bit (word) and 9-bit (byte) bus sizing of 18 bits (word) on Ports B and C

• Select IDT Standard timing (using EFA , EFB , FFA , and FFC flag functions) or First Word Fall Through Timing (using ORA, ORB, IRA, and IRC flag functions)

• Programmable Almost-Empty and Almost-Full flags; each has five default offsets (8, 16, 64, 256 and 1024)

• Serial or parallel programming of partial flags

• Big- or Little-Endian format for word and byte bus sizes

• Loopback mode on Port A

• Retransmit Capability

• Master Reset clears data and configures FIFO, Partial Reset clears data but retains configuration settings

• Mailbox bypass registers for each FIFO

• Free-running CLKA, CLKB and CLKC may be asynchronous or coincident (simultaneous reading and writing of data on a single clock edge is permitted)

• Auto power down minimizes power dissipation

• Available in a space-saving 128-pin Thin Quad Flatpack (TQFP)

• Pin compatible to the lower density parts, IDT72V3626/72V3636/ 72V3646/72V3656/72V3666/72V3676

• Industrial temperature range (–40°C to +85°C) is available