Low-power Universal Serial Bus interface device with DMA

General description The ISP1183 is a Universal Serial Bus (USB) interface device that complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s). It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems

Low-power Universal Serial Bus interface device with DMA

Low-power Universal Serial Bus interface device with DMA

General description The ISP1183 is a Universal Serial Bus (USB) interface device that complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s). It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems

Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator

3M??EMI/EMC Electronic Materials

文件：4.87064 Mbytes Page：12 Pages

Tin-Plated Copper Foil with Conductive Adhesive Tape 1183

文件：66.53 Kbytes Page：2 Pages

12mm Diameter Linear Bearing Pillow Block - SBR12UU

文件：708.49 Kbytes Page：2 Pages