Description

The HSSR-8060 consists of a high-voltage circuit, optically coupled with a light emitting diode (LED). This device is a solid-state replacement for single-pole, normally-open (1 Form A) electromechanical relays used for general purpose switching of signals and low-power loads. The relay turns on (contact closes) with a minimum input current, IF, of 5 mA through the input LED,

Features

• Compact Solid-State Bidirectional Switch

• Normally-Off Single-Pole Relay Function (1 Form A)

• 60 V Output Withstand Voltage in Both Polarities at 25°C

• 0.75/1.5 Amp Current Ratings (See Schematic for Connections A & B)

• Low Input Current; CMOS Compatibility

• Very Low On-resistance: 0.4 Ω Typical at 25°C

• ac/dc Signal and Power Switching

• Input-to-Output Momentary Withstand Insulation Voltage: 2500 Vac, 1 Minute

• 16-kV ESD Immunity: MIL-STD-883, Method 3015

• IEEE Surge Withstand Capability (IEEE STD 472-1974)

• CSA Approved

• UL 508 Approved

Applications

• Programmable Logic Controllers

• Telecommunication Switching Equipment

• Reed Relay Replacement

• 28 Vdc, 24 Vac, 48 Vdc Load Driver

• Industrial Relay Coil Driver