High Voltage EL Lamp Driver

General Description The Supertex HV829A/B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices use a single inductor, a high voltage switching FET and a minimum number of passi

High Voltage EL Lamp Driver

General Description The Supertex HV829A/B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices use a single inductor, a high voltage switching FET and a minimum number of passi

8-bit, serial IN, parallel OUT driver

● Description Serial-in-parallel-out driver is a constant-current output driver with a built-in shift register and a latch circuit to turn on a maximum of 8 LED by a 5-line interface linked to a microcontroller. Output current value of constant-current can be set up to a maximum of 300mA.

NPN power transistors

DESCRIPTION NPN power transistor in a TO-202; SOT128B plastic package. PNP complements: BD826 and BD830. FEATURES • High current (max. 1 A) • Low voltage (max. 80 V). APPLICATIONS • General purpose • Driver stages in hi-fi amplifiers and television circuits.

Integrated Circuit Electronics Attenuator, 90dB @ 1kHz

Features: ● Designed for use in: DC Operated Volume Control Compression & Expansion Amplifier Applications. ● Controlled by DC Voltage or External Variable Resistor ● Economical 8–Lead DIP Package ● Temperature Range: 0° to +75°C

High Density Mounting Type Photocoupler

PC817X Seriescontains an IRED optically coupled to a phototransistor. ( PC817A, PC817B, PC817C, PC817D ) It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV.Collector-emitter voltage is 80V(*) and CTR i

Switched Capacitor Voltage Converters

文件：173.36 Kbytes Page：12 Pages