Hologram Unit

Features Smaller package size achieved through micro-mirror integration (4.8 × 8.2 × 4.3 mm) Built-in I-V conversion amp Focus error signal detection : SSD method Tracking error signal detection : 3 beam method Low-power semiconductor laser included Applications Car CD

Hologram Unit PD

• Able to read and write CD-R/RW discs (12 × writing / 32 × reading) • Applicable to high-speed 24 × readout • Built-in I-V conversion amp. • Low power consumption laser diode • Basic type • Low voltage drive • Built-in I-V conversion amp. • Low power consumption laser diode • Built-in I-

Hologram Unit For optical information processing

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

256 x 9, 512 x 9, 1K x 9 CMOS FIFO

Descriptions The MS7200L/7201AL/7202AL are dual-port static RAM based CMOS First-In/First-Out (FIFO) memories organized in nine-bit wide words. The devices are configured so that data is read out in the same sequential order that it was written in. Additional expansion logic is provided to allow