Call Progress Tone Detector

General Description The HT9020 provides two modes; Call progress tone decoder and Busy redial controller, to support the application fields. Features • Low cost 32768Hz crystal • Low power consumption • Operating voltage: 2.5V to 5.5V (CPT mode) 2.0V to 5.5V

Call Progress Tone Decoder & ABR Controller

General Description The HT9020 provides two modes; Call progress tone decoder and Busy redial controller, to support the application fields. Features • Low cost 32768Hz crystal • Low power consumption • Operating voltage: 2.5V to 5.5V (CPT mode) 2.0V to 5.5V

Call Progress Tone Detector

10-Bit 60 MSPS A/D Converter

GENERAL DESCRIPTION The AD9020 A/D converter is a 10-bit monolithic converter capable of word rates of 60 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. E

10-Bit 60 MSPS A/D Converter

GENERAL DESCRIPTION The AD9020 A/D converter is a 10-bit monolithic converter capable of word rates of 60 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. E

10-Bit 60 MSPS A/D Converter

GENERAL DESCRIPTION The AD9020 A/D converter is a 10-bit monolithic converter capable of word rates of 60 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. E

1, 2, and 4k bit EEPROMs for direct connection to serial ports

• Overview The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is

1, 2, and 4k bit EEPROMs for direct connection to serial ports

• Overview The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is