射频前端芯片

Digital electropneumatic process controller for integrated mounting on process control valves

The compact process controller device Type 8693 is optimised for integrated mounting on the pneumatic actuators in the Type 23xx/2103 process valve series and is specially designed for the requirements of a hygienic process environment. The actual value of the process factor is directly supplie

Conductivity meter, ELEMENT design

The Bürkert conductivity meter Type 8222 is designed for measuring the conductivity of fluids. The sensor element comprises a two-electrode cell and a Pt1000 temperature probe. The sensor itself is available with three different cell constants C. These with C= 0.01 or 0.1 cm- 1 are fitted with

Pneumatic rotary actuator for the automation of ball and butterfly valves

The pneumatic actuator Type 2053 enables the automated actuation of ball and butterfly valves. The linear stroke movement of the actuator piston is deflected into a 90° rotary movement of the drive shaft. The interface on the armature is designed according to ISO 5211. In addition, the rotary a

2/2 way diaphragm valve with pneumatic position- actuator (Type Classic)

The externally controlled diaphragm valves, Type 2730 and 2731, consist of a pneumatically operated piston actuator, a built-in positioner, a diaphragm and a 2 way valve housing. The proven and robust actuator with plastic housing ensures use under hygienic or aggressive environmental condition

2/2-way Bellow Control Valve

The bellow control valve is a pneumatically operated process valve with a single-acting diaphragm actuator. A PTFE bellow ensures the separation between medium and actuator. The materials used and the design of the media space allow the use under hygienic or aggressive conditions. It has a good