NTSC/PAL Video Encoder

The HMP8170, HMP8171, HMP8172, and HMP8173 NTSC and PAL encoders are designed for use in systems requiring the generation of high-quality NTSC and PAL video. Features • (M) NTSC and (B, D, G, H, I, M, N, NC) PAL Operation • BT.601 and Square Pixel Operation • Digital Input Formats - 8-bit

NTSC/PAL Video Encoder

Features • (M) NTSC and (B, D, G, H, I, M, N, NC) PAL Operation • BT.601 and Square Pixel Operation • Digital Input Formats - 8-bit, 16-bit 4:2:2 YCbCr - 8-bit BT.656 • Analog Output Formats - Y/C + Two Composite - RGB + Composite - YUV + Composite • Flexible Video Timing Control - Timi

NTSC/PAL Video Encoder

文件：632.77 Kbytes Page：33 Pages

RS232/422 Low Cap, #24-10pr, FPO, Indiv.& O/A FoilsBraid, PVC Jkt, CM,100Ω

Product Description Computer EIA RS-232/422, Digital Audio Cable, 24 AWG stranded (7x32) tinned copper conductors, Datalene® insulation, 10 twisted pairs individually Beldfoil® shielded + overall 100 Beldfoil® + tinned copper braid shield (65 coverage), drain wire, PVC jacket.

250 MHz, 10 ns Switching Multiplexers w/Amplifier

PRODUCT DESCRIPTION The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50 mA of output current. They offer –3 dB signal b

250 MHz, 10 ns Switching Multiplexers w/Amplifier

PRODUCT DESCRIPTION The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50 mA of output current. They offer –3 dB signal b

250 MHz, 10 ns Switching Multiplexers w/Amplifier

PRODUCT DESCRIPTION The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50 mA of output current. They offer –3 dB signal b

250 MHz, 10 ns Switching Multiplexers w/Amplifier

PRODUCT DESCRIPTION The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50 mA of output current. They offer –3 dB signal b