Octal D-type Flip-Flops (with 3-state outputs)/Octal D-type Flip-Flops (with inverted 3-state outputs)

Description These devices are positive edge triggered flip-flops. The difference between HD74HC374 and HD74HC534 is only that the former is a true outputs and the latter is a false outputs. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on p

Octal D-type Flip-Flops (with 3-state outputs)

文件：139.21 Kbytes Page：11 Pages

Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC374; 74HCT374 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT374 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive,

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT374 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive,

OCTAL D-TYPE FLIP-FLOP POSITIVE EDGE TRIGGER 3-STATE

文件：230.9 Kbytes Page：5 Pages

Octal 3?뭆tate Non?묲nverting D Flip?묯lop

文件：130.74 Kbytes Page：9 Pages