Hex Bus Drivers (Noninverted Data Outputs with 3-state outputs)

Hex Bus Drivers (Noninverted Data Outputs with 3-state outputs) Features • High Speed Operation: tpd(A to Y) = 8.5 ns typ (CL= 50 pF) • High Output Current: Fanout of 15 LSTTL Loads • Wide Operating Voltage: VCC= 2 to 6 V • Low Input Current: 1 µA max • Low Quiescent Suppl

HEX BUFFER / LINE DRIVER 3-STATE

Hex buffer/line driver; 3-state

1. General description The 74HC367; 74HCT367 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. It enables the use of current limiting resistors to int

Hex buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT367 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

Hex buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT367 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

Hex buffer/line driver; 3-state

1. General description The 74HC367; 74HCT367 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. It enables the use of current limiting resistors to int