Dual J-K Flip-Flops (with Preset and Clear)

Description Each flip-flop has independent J, K, preset, clear and clock inputs and Q and Q outputs. This device is edge sensitive to the clock input and changes state on the positive going transition of the clock pulse. Clear and preset are independent of the clock and accomplished by a low lo

Dual JK flip-flop with set and reset; positive-edge-trigger

1. General description The 74HC109; 74HCT109 is a dual positive edge triggered JK flip-flop featuring individual J and K inputs, clock (CP) inputs, set (SD) and reset (RD) inputs and complementary Q and Q outputs. The set and reset are asynchronous active LOW inputs and operate independently of

High Speed CMOS Logic

Features Output Drive Capability: 10 LSTTL Loads Low Input Current: 1μA Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with 74LS109.

Dual JK flip-flop with set and reset; positive-edge trigger

GENERAL DESCRIPTION The 74HC/HCT109 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT109 are dual positive-edge triggered, JK flip-flops with individual J, K inputs, clock (CP)

Dual JK flip-flop with set and reset; positive-edge trigger

GENERAL DESCRIPTION The 74HC/HCT109 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT109 are dual positive-edge triggered, JK flip-flops with individual J, K inputs, clock (CP)

High Speed CMOS Logic

文件：643.32 Kbytes Page：6 Pages