18-bit Universal Bus Driver with 3-state Outputs and Inverted Latch Enable

Description The HD74ALVC162834 is an 18-bit universal bus driver designed for 2.3 V to 3.6 V VCC operation. Features • Meets “PC SDRAM registered DIMM design support document, Rev. 1.2” • VCC = 2.3 V to 3.6 V • Typical VOL ground bounce

18-bit Universal Bus Driver with 3-state Outputs and Inverted Latch Enable

Description The HD74ALVC162834A is an 18-bit universal bus driver designed for 2.3 V to 3.6 V VCC operation. Features • Supports PC133 and meets “PC SDRAM registered DIMM specification, Rev. 1.1” • VCC = 2.3 V to 3.6 V • Typical VOL ground bounce

18-bit Universal Bus Driver with 3-state Outputs

Description The HD74ALVC162835 is an 18-bit universal bus driver designed for 2.3 V to 3.6 V VCC operation. Features • Meets “PC SDRAM registered DIMM design support document, Rev. 1.2” • VCC = 2.3 V to 3.6 V • Typical VOL ground bounce

18-bit Universal Bus Driver with 3-state Outputs

Description The HD74ALVC162835 is an 18-bit universal bus driver designed for 2.3 V to 3.6 V VCC operation. Data flow from A to Y is controlled by the output enable (OE). The device operates in the transparent mode when the latch enable (LE) is high. When LE is low, the A data is latched if the c

18-bit Universal Bus Driver with 3-state Outputs

Description The HD74ALVC162835A is an 18-bit universal bus driver designed for 2.3 V to 3.6 V VCC operation. Data flow from A to Y is controlled by the output enable (OE). The device operates in the transparent mode when the latch enable (LE) is high. When LE is low, the A data is latched if the

20-bit Universal Bus Driver with 3-state Outputs

Description This 20-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation. Features • VCC = 2.3 V to 3.6 V • Typical VOL ground bounce 2.0 V (@VCC = 3.3 V, Ta = 25°C) • High output current ±12 mA (@VCC = 3.0 V) • A