QUAD BILATERAL SWITCH

DESCRIPTION The HCC4016B (extended temperature range) and HCF4016B (intermediate temperature range) are monolithic integrated circuit, available in 14-lead dual in-line plastic or ceramic package and plastic micropackage. ■ 20V DIGITAL OR ± 10V PEAK-TO-PEAK SWITCHING ■ 280Ω TYPICAL ON RESISTANC

封装/外壳：14-DIP（0.300"，7.62mm） 包装：管件 描述：IC BILATERAL SW 1 X 1:1 14DIP 集成电路（IC） 信号开关，多路复用器，解码器

QUAD BILATERAL SWITCH

文件：639.23 Kbytes Page：9 Pages

Quad Analog Switch/Quad Multiplexer

The MC14016B quad bilateral switch is constructed with MOS P–channel and N–channel enhancement mode devices in a single monolithic structure. Each MC14016B consists of four independent switches capable of controlling either digital or analog signals. The quad bilateral switch is used in signal gat

Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec