Quad Buffer with 3-STATE Outputs

General Description The VHC125 contains four independent non-inverting buffers with 3-STATE outputs. It is an advanced high speed CMOS device fabricated with silicon gate CMOS technology and achieves the high-speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS

Quad. Bus Buffer Gates (with 3-state outputs)

Description The HD74HC125, HD74HC126 require the 3-state control input C to be taken high to put the output into the high impedance condition, whereas the HD74HC125, HD74HC126 requires the control input to be low to put the output into high impedance. Features • High Speed Operation: tpd = 8 ns

Quad buffer/line driver; 3-state

DESCRIPTION The 74AHC/AHCT125 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard No. 7A. The 74AHC/AHCT125 are four non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) a

QUAD BUS BUFFER

The TC74VHC125/126 are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2 MOS technology. They achieve the high speed operation similar to equivalent Bipolar Shottky TTL while maintaining the CMOS low power dissipation.

Quad 3-State Noninverting Buffers

Quad 3-State Noninverting Buffers High-Performance Silicon-Gate CMOS The SL74HC125 is identical in pinout to the LS/ALS125. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The SL74HC125 noninverting buffers are desig

QUAD BUS BUFFERS 3-STATE

DESCRIPTION The 74VHC125 is an advanced high-speed CMOS QUAD BUS BUFFERS fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. The device requires the 3-STATE control input G to be set high to place the output in to the high impedance state. Power down pr

3-STATE Quad Buffers

High Speed CMOS Logic Quad Buffer, Three-State

文件：36.72 Kbytes Page：7 Pages

Quad 3-State Noninverting Buffers

文件：113.41 Kbytes Page：7 Pages

Quad 3-State Noninverting Buffers

文件：113.41 Kbytes Page：7 Pages

Heavy Duty Fuse Clips

• Lead free product and RoHS complaint. • Suiteable for 13/32 diamter fuses • Suiteable for photovoltaic fuse applications • Silver plating with antitarnish for high reliability applicaions • Recognized to UL/CSA/ NMX 4248-1 • Rivet mount for panel or through hole options for printed

MXM 230P Connector, STD, 7.8H, Gold Flash, Black, Reel

Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions.

Circuit Board Mount Clips for 10mm (13/32”) Diameter Fuses

文件：228.26 Kbytes Page：1 Pages

The Pace-Setter for Long Life and High Temperature

文件：805.14 Kbytes Page：5 Pages

Screw Terminal Mounting Hardware and Accessories

文件：1.1525 Mbytes Page：3 Pages