Two-Wire Hall Effect Sensor Family

Introduction This sensor family consists of different two-wire Hall switches produced in CMOS technology. All sensors change the current consumption depending on the external magnetic field and require only two wires between sensor and evaluation circuit. The sensors of this family differ in th

Computer Grade, Axial Leaded, Aluminum

Type 556 capacitors are designed for data processing, telecom and instrumentation applications requiring smaller size with extended temperature range. They have longer life and up to twice the ripple capability of +85 °C capacitors. Highlights • Small size • Extended life • Extended temperatur

BIG TWIN MOTORCYCLES

GENERAL INFORMATION Any coil or combination of coils with a total primary resistance of at least 2.0 ohms can be used with this distributor. We recommend a 2-3 ohm coil for racing and a 3-4 ohm coil for street use. A coil with 4-5 ohms resistance may be used. However, performance may be reduced,

556 Series Rack and Panel Connectors | .156 (3.96mm) Contact Spacing | 3 Pin

Features .156 (3.96mm) Contact Spacing Available in Plug and Receptacle. Edacon Hermaphroditic Contact Mating Design Contact Termination Options include Crimp, P.C. Tail, Wire Hole, Wire Wrap and Taper Tail Tools are Available for Contact Installation, Removal and Crimping RoHS Compliant

KEYSTONE ELECTRONICS CORP.

NOTES: TAPE AND REEL SPECIFICATIONS: 1. TAPE: MAT'L ALL CONDUCTIVE POLYSTYRENE CARRIER ANSI/EIA-481 STANDARD 1.260 [32.0] WIDE; .787 [20.0] PITCH 2. REEL: 13.0 [330.2] DIA. 250 PIECES OF PART NO. 556 PER REEL. 02NOTES: TAPE AND REEL SPECIFICATIONS: 1. TAPE: MAT'L ALL CONDUCTIVE POLYSTYREN

Drywall Punch

文件：1.8415 Mbytes Page：16 Pages