Charge amplifier

For radiation and high energy particle detection H4083 is a low-noise hybrid charge amplifier designed for a wide range of spectrometric applications including soft X-ray and low to high energy gamma-ray spectrometry. The first stage of this amplifier uses a low-noise junction type FET, which

用于辐射和高能粒子探测

H4083是一款低噪声混合电荷放大器，用于多种光谱测定应用，比如软X射线和低能至高能伽马射线的光谱测定。放大器的第一级为低噪声节型FET，与具有较大结电容的光电二极管使用，具有出色的性能。该放大器特别适合于滨松的S3590/S3204等系列的硅PIN光电二极管。S3590系列可以直接安装在该放大器电路板的后部，所以不会增大杂散电容。该放大器体积小，重量轻，因此可以更灵活的设计和开发探测器。 \n- 低噪声\n- 体积小，重量轻\n- 易用\n;

Current Mode Four Quadrant Multiplier

General Description The 4083C makes use of an Elantec fully complimentary oxide isolated bipolar process to produce a patent pending current in, current out four quadrant multiplier. Input and output signal summing and direct interface to other current mode devices can be accomplished by simple c

Current Mode Four Quadrant Multiplier

General Description The 4083C makes use of an Elantec fully complimentary oxide isolated bipolar process to produce a patent pending current in, current out four quadrant multiplier. Input and output signal summing and direct interface to other current mode devices can be accomplished by simple c

Current Mode Four Quadrant Multiplier

General Description The 4083C makes use of an Elantec fully complimentary oxide isolated bipolar process to produce a patent pending current in, current out four quadrant multiplier. Input and output signal summing and direct interface to other current mode devices can be accomplished by simple c

Current Mode Four Quadrant Multiplier

General Description The 4083C makes use of an Elantec fully complimentary oxide isolated bipolar process to produce a patent pending current in, current out four quadrant multiplier. Input and output signal summing and direct interface to other current mode devices can be accomplished by simple c