32-bit GTL terminator with octal enables

DESCRIPTION The GTL202x series are 32-bit bus switches with GTL termination and octal output enables. The GTL202x is intended to provide GTL bus termination in multi-processor environments. The enable pins allow the system control to disconnect the bus termination. When the bus switch is enabled

32-bit GTL terminator with octal enables

DESCRIPTION The GTL202x series are 32-bit bus switches with GTL termination and octal output enables. The GTL202x is intended to provide GTL bus termination in multi-processor environments. The enable pins allow the system control to disconnect the bus termination. When the bus switch is enabled

Integrated Circuit General Purpose, High Current 7-Segment Display Driver

Description: The NTE2023 is a general purpose high current transistor array in a 16–Lead DIP type package comprised of seven high current silicon NPN transistor on a common monolithic substrate. It is connected in a common–collector configuration.

CK408 66/100/133/200 MHz spread spectrum differential system clock generator

DESCRIPTION The PCK2023 is a clock synthesizer/driver for a Pentium IV and other similar processors. The PCK2023 has three differential pair CPU current source outputs. There are ten PCI clock outputs running at 33 MHz and two 48 MHz clocks. There are six 3V66 outputs. Finally, there is one 3.3

CK408 66/100/133/200 MHz spread spectrum differential system clock generator

DESCRIPTION The PCK2023 is a clock synthesizer/driver for a Pentium IV and other similar processors. The PCK2023 has three differential pair CPU current source outputs. There are ten PCI clock outputs running at 33 MHz and two 48 MHz clocks. There are six 3V66 outputs. Finally, there is one 3.3

CK408 66/100/133/200 MHz spread spectrum differential system clock generator

DESCRIPTION The PCK2023 is a clock synthesizer/driver for a Pentium IV and other similar processors. The PCK2023 has three differential pair CPU current source outputs. There are ten PCI clock outputs running at 33 MHz and two 48 MHz clocks. There are six 3V66 outputs. Finally, there is one 3.3

Drive processor for DCC systems

GENERAL DESCRIPTION The SAA2023 performs the drive processor function in the DCC system. This function is built up of digital equalizer, error correction and tape formatting functions. The digital equalizer is intended for use with DCC read amplifiers TDA1318 or TDA1380. The tape formatting and e