LNA/Driver with Bypass 0.1 to 6 GHz

FEATURES Flexible Bias Voltage and Current Process: GaAs pHEMT Single Control Logic Input Pre-Matched to 50 Ω Compact 1.5 x 1.5 mm DFN-6 Package Reference: 3.3 V / 50 mA / 1.9 GHz Gain: 15.3 dB OP1dB: 19.3 dBm OIP3: 33 dBm Evaluation Board Noise Figure: 0.9 dB Bypass Mode Gain: -1.9 dB

Broadband LNAs/Linear Drivers

GRF4142 is a low noise amplifier (LNA) with low loss bypass which requires only a single control input. It is designed for high performance applications up to 3.8 GHz.(1)With minimal external matching, the device achieves outstanding noise figure (NF), high gain and high linearity. The LNA is operat Reference: 3.3V/50mA/1.9 GHz\n• Gain: 16.0 dB\n• EVB NF: 0.95 dB\n• OP1dB: 19.0 dBm\n• OIP3: 34.0 dBm\n• Bypass Mode Gain: -1.3 dB\n• Flexible Bias Voltage and Current\n• Single Control Logic Input\n• Pre-matched to 50 Ω\n• Process: GaAs pHEMT;

Smart High-Side Power Switch 1 Channel: 1 x 200m?

General Description N channel vertical power FET with charge pump, ground referenced CMOS compatible input, monolithically integrated in Smart SIPMOS® technology. Providing embedded protective functions. Features • Short circuit protection • Current limitation • Overload protection • Overvol

250MHz, Low-Power, High-Output-Current, Differential Line Driver

General Description The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines. Features ♦ 250MHz -3dB

250MHz, Low-Power, High-Output-Current, Differential Line Driver

General Description The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines. Features ♦ 250MHz -3dB

AF Power Amplifier (Split Power Supply)

Features • The STK4102II series (STK4142II) and STK4101V series (high-grade type) are pin-compatible in the output range of 6W to 50W and enable easy design. • Small-sized package whose pin assignment is the same as that of the STK4101II series • Built-in muting circuit to cut off v

AF Power Amplifier (Split Power Supply)

Features • The STK4102II series (STK4142II) and STK4101V series (high-grade type) are pin-compatible in the output range of 6W to 50W and enable easy design. • Small-sized package whose pin assignment is the same as that of the STK4101II series • Built-in muting circuit to cut off v