Ultra-broadband Gain Block

The GRF3012 is a broadband gain block designed for RF applications from near DC up to X-Band.(1)This resistively biased device employs an external resistor in series with VCC to set a nominal ICCQ of 22 mA. GRF3012 is internally matched to 50Ω at the input and output ports.(1)The device can be opera Reference: 5V/22mA/5.0 GHz\n• Gain: 11.0 dB\n• OP1dB: 5.0 dBm\n• OIP3: 18.0 dBm\n• NF: 5.6 dB\n• Internally Matched: 50Ω\n• Process: InGaP HBT;

Optocoupler with Phototriac Output

Description The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for h

Optocoupler with Phototriac Output

Description The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for h

Optocoupler with Phototriac Output

Description The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for h

6-Pin DIP Random-Phase Optoisolators Triac Driver Output

6-Pin DIP Random-Phase Optoisolators Triac Driver Output (250 Volts Peak) The MOC3010 Series consists of gallium arsenide infrared emitting diodes, optically coupled to silicon bilateral switch and are designed for applications requiring isolated triac triggering, low–current isolated ac switchin

REMOTE CONTROL TRANSMITTER FOR AUDIO AND VIDEO APPLICATIONS

DESCRIPTION The STV3012 is a general purpose infrared remote control transmitter system for low voltage supply applications. It is able to generate a total number of 448 commands which are divided into 7 sub-system groups with 64 commands each. The sub-system code may be selected by a press butto