PCI Express PIPE x1 PHY

The GL9711 is a 1-lane PCI Express PHY Layer Controller, which is compliant with PCI Express Base Specification rev. 1.0a and Intel's PHY Interface for the PCI Express Architecture rev. 1.0. It integrates one SerDes and the Physical Coding Sublayer (PCS) which performs 8b/10b encoding and decoding, ● Complies with PCI Express Base Specification rev. 1.0a\r\n● Complies with Intel’s PHY Interface for PCI Express Architecture rev. 1.0\r\n● Integrates 2.5 gigabit per second (Gpbs) Serializer/Deserializer\r\n● Supports 8-bit or 10-bit parallel interface @250MHz\r\n● Supports 16-bit parallel interfa;

PCI ExpressTM PIPE x1 PHY

文件：404.85 Kbytes Page：42 Pages

PCI ExpressTM PIPE x1 PHY

文件：404.85 Kbytes Page：42 Pages

SILICON PLANAR ZENER DIODES

Features Silicon Planar Zener Diodes The Zener voltages are graded according to the international E 24 standard. Other voltage tolerances on request.

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER

DESCRIPTION The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. FEATURES • High common mode transient immunity (CMH,

CMOS voltage detector IC for battery-operated portable devices

文件：210.89 Kbytes Page：10 Pages

Multi-Channel AC97 Codec With Multi-Codec Option

文件：247.27 Kbytes Page：56 Pages

Multi-Channel AC97 Codec With Multi-Codec Option

文件：247.27 Kbytes Page：56 Pages