infrared remote control system receiving preamplifiers.

Description\nThe GL3276A is a bipolar analog ICs specifically developed for use in infrared remote control system receiving preamplifiers. Capable of accepting a photodiode directly, these ICs house a high gain initial amplifier, a limiter, a band-pass filter, a detection circuit and a waveform shap · Less changes of malfunction associated with a high-frequency lighting fluorscent lamp internal trap circuit.\n· The central frequency can be varied with an external resistance:\n  fo=30 to 80KHz\n  fo rimming reduce central frequency variance.\n· Few external parts. Internal pull-up resistance and;

Less changes of malfunction associated with a high-frequency lighting fluorscent lamp internal trap circuit.

8-bit 160MSPS Flash A/D Converter

Description The CXA3276Q is an 8-bit high-speed flash A/D converter capable of digitizing analog signals at the maximum rate of 160MSPS. ECL, PECL or TTL can be selected as the digital input level in accordance with the application. The TTL digital output level allows 1:2 demultiplexed output. F

8-Bit, 160MSPS, Flash A/D Converter

The HI3276 is an 8-bit, high-speed, flash analog-to-digital converter optimized for high speed, low power, and ease of use. With a 160MSPS encode rate capability and full-power analog bandwidth of 250MHz, this component is ideal for applications requiring the highest possible dynamic performance.

8-Bit, 160MSPS, Flash A/D Converter

The HI3276 is an 8-bit, high-speed, flash analog-to-digital converter optimized for high speed, low power, and ease of use. With a 160MSPS encode rate capability and full-power analog bandwidth of 250MHz, this component is ideal for applications requiring the highest possible dynamic performance.

Fault Protected 16 Channel, 12-Bit Data Acquisition Subsystem

GENERAL DESCRIPTION The MP3276 is a complete 16-channel, 12-bit Data Acquisition Subsystem with 3-state output buffers for direct interfacing to 16-bit microprocessor buses. Implemented using an advanced BiCMOS process, the converter combines a 16-channel passive overvoltage protected multiplexer

Fault Protected 16 Channel, 12-Bit Data Acquisition Subsystem

GENERAL DESCRIPTION The MP3276 is a complete 16-channel, 12-bit Data Acquisition Subsystem with 3-state output buffers for direct interfacing to 16-bit microprocessor buses. Implemented using an advanced BiCMOS process, the converter combines a 16-channel passive overvoltage protected multiplexer