3.5V 400mA Low Dropout Regulator

General Description The G930/G931 positive 3.5V voltage regulator features the ability to source 400mA of output current with a dropout voltage of typically 0.8V over the entire operating temperature range. A low quiescent current is provided over the entire output current range. The typical qu

3.5V 400mA Low Dropout Regulator

文件：142.66 Kbytes Page：5 Pages

3.5V 400mA Low Dropout Regulator

3.5V 400mA Low Dropout Regulator

General Description The G930/G931 positive 3.5V voltage regulator features the ability to source 400mA of output current with a dropout voltage of typically 0.8V over the entire operating temperature range. A low quiescent current is provided over the entire output current range. The typical qu

连接器外壳

连接器外壳

3.5V 400mA Low Dropout Regulator

文件：142.66 Kbytes Page：5 Pages

3.5V 400mA Low Dropout Regulator

文件：142.66 Kbytes Page：5 Pages

SB® 350 Connectors Up to 500 Amps

The SB® 350 is the largest connector in the series with power capabilities up to 500 amps with a 350 mcm wire. Wires ranging from 1/0 to 350 mcm (53.5 to 185 mm²) fit into the one piece housing available in standard PC or a chemical resistant PBT/PC blend. Silver plated wire or busbar contact

SB® 350 Connector

FEATURES • Mechanical keyed housings Prevents accidental mating of components operating at different voltage levels • Single-piece housing and unitized construction Provides industrial quality and durability • Genderless design Makes assembly quick and easy and reduces number of parts sto

METALLIZED POLYPROPYLENE CAPACITORS

Temperature: -55°C to +85°C at rated voltage; to +105°C with 50 voltage derating. Dielectric Voltage Test: Will withstand the application of 150 VDC, 300 VDC and 600 VDC on 67 VAC, 135 VAC and 270 VAC respectively at 25°C for a period not to exceed 1 minute; current limited to 5 mA. DC Life T

Screw/solder terminal strip Screw/solder tag connection

The screw/solder terminal strip 931-A-LFDS with a pitch of 3,5 mm is available in 2- to 12-pole design. Due to the small pitch, it requires only little mounting space and is therefore well suited for low-voltage applications. The solder tag is formed as a wire protector. The wire protection re

PCB connector Screw connection, wire entrance vertical to PCB

文件：60.83 Kbytes Page：1 Pages