位置:MB90F423GAPFV > MB90F423GAPFV详情

MB90F423GAPFV中文资料

厂家型号

MB90F423GAPFV

文件大小

1706.91Kbytes

页面数量

99

功能描述

16-Bit Original Microcontroller

数据手册

下载地址一下载地址二到原厂下载

生产厂商

FUJITSU

MB90F423GAPFV数据手册规格书PDF详情

■ DESCRIPTIONS

The FUJITSU MB90420G/5G (A) Series is a 16-bit general purpose high-capacity microcontroller designed for vehicle meter control applications etc.

The instruction set retains the same AT architecture as the FUJITSU original F2MC-8L and F2MC-16L series, with further refinements including high-level language instructions, expanded addressing mode, enhanced (signed) multipler-divider computation and bit processing.

In addition, A 32-bit accumulator is built in to enable long word processing.

■ FEATURES

• 16-bit input capture (4 channels)

Detects rising, falling, or both edges.

16-bit capture register × 4

Pin input edge detection latches the 16-bit free-run timer counter value, and generates an interrupt request.

• 16-bit reload timer (2 channels)

16-bit reload timer operation (select toggle output or one-shot output)

Event count function selection provided

• Clock timer (main clock)

Operates directly from oscillator clock.

Compensates for oscillator deviation

Read/write enabled second/minute/hour register Signal interrupt

• 16-bit PPG (3 channels)

Output pins (3) , external trigger input pin (1)

Output clock frequencies : fCP, fCP/22, fCP/24, fCP/26

• Delay interrupt

Generates interrupt for task switching.

Interruptions to CPU can be generated/deleted by software setting.

• External interrupts (8 channels)

8-channel independent operation

Interrupt source setting available : “L” to “H” edge/ “H” to “L” edge/ “L” level/ “H” level.

• A/D converter

10-bit or 8-bit resolution × 8 channels (input multiplexed)

Conversion time : 6.13 µs or less (at fCP = 16 MHz)

External trigger startup available (P50/INT0/ADTG)

Internal timer startup available (16-bit reload timer 1)

• UART (2 channels)

Full duplex double buffer type

Supports asynchronous/synchronous transfer (with start/stop bits)

Internal timer can be selected as clock (16-bit reload timer 0)

Asynchronous : 4808 bps, 5208 bps, 9615 bps, 10417 bps, 19230 bps, 38460 bps, 62500 bps, 500000 bps

Synchronous : 500 Kbps, 1Mbps, 2Mbps (at fCP = 16 MHz)

• CAN interface *1

Conforms to CAN specifications version 2.0 Part A and B.

Automatic resend in case of error.

Automatic transfer in response to remote frame.

16 prioritized message buffers for data and messages for data and ID

Multiple message support

Receiving filter has flexible configuration : All bit compare/all bit mask/two partial bit masks

Supports up to 1 Mbps CAN WAKEUP function (connects RX internally to INT0)

• LCD controller/driver (1 channel)

Segment driver and command driver with direct LCD panel (display) drive capability

• Low voltage/Program Looping detect reset *2

Automatic reset when low voltage is detected

Program Looping detection function

• Stepping motor controller (4 channels)

High current output for all channels × 4

Synchronized 8/10-bit PWM for all channels × 2

• Sound generator

8-bit PWM signal mixed with tone frequency from 8-bit reload counter.

PWM frequencies : 62.5 kHz, 31.2 kHz, 15.6 kHz, 7.8 kHz (at fCP = 16MHz)

Tone frequencies : 1/2 PWM frequency, divided by (reload frequency +1)

更新时间:2025-10-18 15:14:00
供应商 型号 品牌 批号 封装 库存 备注 价格
FUJITSU
16+
QFP
4000
进口原装现货/价格优势!
FUJITSU
24+
QFP-100
25000
一级专营品牌全新原装热卖
FUJITSU/富士通
23+
TQFP100
3000
一级代理原厂VIP渠道,专注军工、汽车、医疗、工业、
FUJITSU/富士通
2020+
QFP-100
3300
全新原装现货,一片也是批量价。
FUJITSU/富士通
2022+
54
全新原装 货期两周
FUJ
12/16+
BGAQFP
455
普通
FUJ
20+
QFP100
500
样品可出,优势库存欢迎实单
FUJ
10+
TQFP100
67
一级代理,专注军工、汽车、医疗、工业、新能源、电力
FUJ
25+
TQFP100
67
只做原装进口!正品支持实单!
FUJ
23+
TQFP100
12800
公司只有原装 欢迎来电咨询。