General Description

The Fairchild Switch FSTD16861 provides 20-bits of high speed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. A diode to VCC has been integrated into the circuit to allow for level shifting between 5V inputs and 3.3V outputs.

The device is organized as a 10-bit or 20-bit bus switch. When OE1 is LOW, the switch is ON and Port 1A is connected to Port 1B. When OE2 is LOW, Port 2A is connected to Port 2B. When OEX is HIGH, a high impedance state exists between the A and B Ports.

Features

■ 4: switch connection between two ports.

■ Minimal propagation delay through the switch.

■ Low lCC.

■ Zero bounce in flow-through mode.

■ Control inputs compatible with TTL level.

■ TruTranslation™ voltage translation from 5.0V inputs to 3.3V outputs

■ Power-off high impedance inputs and outputs

■ Supports live insertion/withdrawal (Note 1)

Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.