Load Switching Applications

Features • Low ON resistance. • 2.5V drive. • Mounting height 1.1mm. • Composite type, facilitating high-density mounting.

Pch+Pch

DPAK SURFACE MOUNT SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 10.0 Amperes)

VOLTAGE 200 to 600 Volts CURRENT 10 Amperes FEATURES • For surface mounted applications • Low profile package • Built-in strain relief • Easy pick and place • Superfast recovery times for high efficiency • Plastic package has Underwriters Laboratory Flammability Classi

Integrated Circuit FM/AM IF Amplifier

Description: The NTE1003 monolithic integrated circuit is a high grade FM/AM intermediate frequency amplifier in a 14–Lead DIP type package composed of four individual amplifiers and a voltage regulator. Features: ● Composed of Four Individual Amplifiers ● Low Power Consumption ● High Gain ●

Photo Interrupter

Photo Interrupter For contactless SW, object detection Outline ON1003 is an ultraminiature, highly reliable transmittive photosensor in which a high efficiency GaAs infrared light emitting diode chip and a high sensitivity Si phototransistor chip are integrated in a double molded resin

REFERENCE FREQUENCY 16.368 MHz, 2ND IF FREQUENCY 4.092 MHz RF/IF FREQUENCY DOWN-CONVERTER PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER

DESCRIPTION The µPB1005K is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer on 1 chip. The µPB1005K features 36-pin plastic QFN, fixed prescaler and supply voltage. The

REFERENCE FREQUENCY 16.368 MHz, 2ND IF FREQUENCY 4.092 MHz RF/IF FREQUENCY DOWN-CONVERTER PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER

DESCRIPTION The µPB1005GS is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer on 1 chip. The µPB1005GS features shrink package, fixed prescaler and supply voltage. The 30