10-Bit Bus Switch with Pre-Charged Outputs

General Description The Fairchild Switch FST6800 provides 10-bits of high-speed CMOS TTL-compatible bus switching. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device precharges the

支持预充输出的10位总线开关

FST6800飞兆开关提供了符合TTL要求的10位、高速CMOS总线开关。 该开关具有低导通电阻，允许输入与输出连接，不会增加传播延迟，也不会产生额外的地弹噪声。 该器件预充B端口至一个可选偏置电压(BiasV)以将带电插入噪声最小化。 该器件由10位开关和总线使能(OE#)信号组成。 当OE#处于低电平时，开关接通，端口A连接到端口B。 当OE#处于高电平时，开关为开路，B端口通过一个等效10-kohm电阻预充至BiasV。 两端口之间的 4Ω 开关连接\n通过该开关将实现最小的传播延迟\n低 lCC\n流通模式零反弹\n输出预充可最大限度地减小实时插入噪声\n控制输入​​与 TTL 电平兼容;

10-Bit Bus Switch with Pre-Charged Outputs

General Description The Fairchild Switch FST6800 provides 10-bits of high-speed CMOS TTL-compatible bus switching. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device precharges the

10-Bit Bus Switch with Pre-Charged Outputs

General Description The Fairchild Switch FST6800 provides 10-bits of high-speed CMOS TTL-compatible bus switching. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device precharges the

10-Bit Bus Switch with Pre-Charged Outputs

General Description The Fairchild Switch FST6800 provides 10-bits of high-speed CMOS TTL-compatible bus switching. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device precharges the

封装/外壳：24-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC BUS SWITCH 10 X 1:1 24QSOP 集成电路（IC） 信号开关，多路复用器，解码器

封装/外壳：24-SOIC（0.295"，7.50mm 宽） 包装：卷带（TR） 描述：IC BUS SWITCH 10 X 1:1 24SOP 集成电路（IC） 信号开关，多路复用器，解码器

Fluorescent display tube level meter driver, 16-point x 2 channel, VU scale, bar display

The BA6800AF is a two-channel, 16-point fluorescent display tube driver for VU-scale bar-level meters. It uses a dynamic-drive system and is provided with both AC and DC inputs. The AC input mode has a peak hold circuit. The IC features a power-on mute, and the output block can directly drive fl

10-bit bus switch with precharged outputs for live insertion

DESCRIPTION The CBT6800 provides ten bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows bi-directional connections to be made while adding near-zero propagation delay. The device also precharges the B port to a user-selectable bias voltage (BIASV)

16-Bit Microprocessor With 8-Bit Data Bus

OVERVIEW This manual includes hardware details and programming information for the MC68000, the MC68HC000, the MC68HC001, the MC68008, the MC68010, and the MC68EC000. For ease of reading, the name M68000 MPUs will be used when referring to all processors. Refer to M68000PM/AD, M68000 Programmers

subminiature t-3/4 5-volt resistor lamps

文件：211.45 Kbytes Page：2 Pages

Video modulator circuit

文件：54.87 Kbytes Page：10 Pages