16-Bit Bus Switch

General Description The Fairchild Switch FST16245 provides 16-bits of high speed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Features ■4:swi

16-Bit Bus Switch

文件：158.1 Kbytes Page：4 Pages

封装/外壳：48-TFSOP（0.240"，6.10mm 宽） 包装：卷带（TR） 描述：IC BUS SWITCH 8 X 1:1 48TSSOP 集成电路（IC） 信号开关，多路复用器，解码器

2.5V/3.3V 16-bit bus transceiver with direction pin 3-State

DESCRIPTION The 74ALVC16245(74ALVCH16245) is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The 74ALVC16245(74ALVCH16245) features two output enable (nOE) inputs for easy cascading and two send/receive (nDIR) inputs for direct

2.5V/3.3V 16-bit bus transceiver with direction pin 3-State

DESCRIPTION The 74ALVC16245(74ALVCH16245) is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The 74ALVC16245(74ALVCH16245) features two output enable (nOE) inputs for easy cascading and two send/receive (nDIR) inputs for direct

2.5V/3.3V 16-bit bus transceiver with direction pin 3-State

DESCRIPTION The 74ALVC16245(74ALVCH16245) is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The 74ALVC16245(74ALVCH16245) features two output enable (nOE) inputs for easy cascading and two send/receive (nDIR) inputs for direct

2.5V/3.3V ALVT 16-bit transceiver 3-State

DESCRIPTION The 74ALVT16245 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V. This device is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The control function im

16-bit bus transceiver with direction pin; 5V tolerant 3-State

DESCRIPTION The 74LVC(H)16245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these device