低电压 SP3T 模拟开关（3:1 多路复用器/信号分离器）

FSA3357是一款高性能单刀/三掷(SP3T)模拟开关或3:1复用器/多路复用器。 该器件采用先进的次微米CMOS技术制造，实现了高速使能和停用时间以及低导通电阻。 先开后合选择电路可防止B0、B1或B2端口上的信号由于开关在引脚切换期间暂时接通而被损坏。 该器件的额定工作范围为1.65到5.5V VCC。 控制输入容差电压最高可达5.5V，且与VCC工作范围无关。 •可在模拟和数字应用中使用\n•节省空间的US8 8引线表面贴装封装\n•低导通电阻；< 3.3V VCC时的导通电阻通常为9ohm\n•宽VCC工作范围：1.65V到5.5V\n•轨到轨信号处理\n•关断高阻抗控制输入\n•控制输入的耐过压达7.0V\n•先开后合使能电路\n•250 MHz - 3dB带宽\n•节省空间的无铅MicroPak™ 封装;

Low Voltage SP3T Analog Switch

文件：361.23 Kbytes Page：13 Pages

Low Voltage SP3T Analog Switch (3:1 Multiplexer/Demultiplexer)

文件：112.22 Kbytes Page：7 Pages

Low Voltage SP3T Analog Switch (3:1 Multiplexer/Demultiplexer)

文件：112.22 Kbytes Page：7 Pages

Low Voltage SP3T Analog Switch

文件：361.23 Kbytes Page：13 Pages

Low Voltage SP3T Analog Switch

文件：361.23 Kbytes Page：13 Pages

IC for CMOS System Reset

Outline This IC is a system reset IC developed using the CMOS process. Super low consumption current of 0.25µA typ. has been achieved through use of the CMOS process. Also, detection voltage is high precision detection of ±2. Features 1. Super low consumption current 0.25µA typ. (when VDD

CMOS System Reset

Outline This IC is a system reset IC developed using the CMOS process. Super low consumption current of 0.25µA typ. has been achieved through use of the CMOS process. Also, detection voltage is high precision detection of ±2. Features 1. Super low consumption current 0.25µA typ. (when VDD

3.0 inch ( 76.2mm ) 5X7 DOT MATRIX LED DISPLAY

DESCRIPTION The UVP-3X57SERIES is 3.0 inch (76.2mm) height 5X7 dot matrix display. Single color display have the choices of three bright colors-AlGaAs red/green/red orange. Multicolor display are applicable to two colors : green and red orange. All device have gray face and white dot. The AlG

LOW DISTORTION LINE MATCHING TRANSFORMER

文件：139.43 Kbytes Page：5 Pages