9-bit BTL 3.3V latched/registered/pass-thru Futurebus transceiver

DESCRIPTION The FBL2031 is a 9-bit latched/registered transceiver featuring a latched, registered or pass-thru mode in either the A-to-B or B-to-A direction. FEATURES • Latched, registered or straight through in either A to B or B to A path • Drives heavily loaded backplanes with equivalent lo

9-bit BTL 3.3V latched/registered/pass-thru Futurebus transceiver

9-bit BTL 3.3V latched/registered/pass-thru Futurebus transceiver

DESCRIPTION The FBL2031 is a 9-bit latched/registered transceiver featuring a latched, registered or pass-thru mode in either the A-to-B or B-to-A direction. FEATURES • Latched, registered or straight through in either A to B or B to A path • Drives heavily loaded backplanes with equivalent lo

MMIC variable gain amplifier

DESCRIPTION Silicon Monolitic Microwave Integrated Circuit (MMIC) 2 stage variable gain amplifier in double polysilicon technology in a 5-pin SOT551A plastic SMD package for low voltage medium power applications. FEATURES • High gain • Excellent adjacent channel power rejection • Small SMD pa

9-bit latched/registered/pass-thru Futurebus transceiver

DESCRIPTION The FB2031 is a 9-bit latched/registered transceiver featuring a latched, registered or pass-thru mode in either the A-to-B or B-to-A direction. The FB2031 is intended to provide the electrical interface to a high performance wired-OR bus. FEATURES • Latched, registered or straight

8 - Bit Microcontroller

Description The MVI MSU2051 series product is an 8 - bit single chip microcontroller. It provides hardware features and a powerful instruction set, necessary to make it a versatile and cost effective controller for those applications demand up to 32 I/O pins or need up to 64 K byte external memor

Integrated Circuit Seven-Segment Gas-Discharge Display Driver

Description: The NTE2031 is a seven channel digit (anode) driver in a 16–Lead DIP type package specifically designed to be used with high–voltage, gas–discharge numeric displays. This device requires a low logic level to turn the drivers on with a low input current requirement of any 300µA typi