3 Half-Bridge Gate-Drive IC

Description The FAN7888 is a monolithic three half-bridge gate-drive IC designed for high-voltage, high-speed driving MOSFETs and IGBTs operating up to +200V. Features „Floating Channel for Bootstrap Operation to +200V „Typically 350mA/650mA Sourcing/Sinking Current Driving Capabilit

225V，可兼容 3.3/5V 输入逻辑，0.65/0.35A 汲/源电流，3 相半桥门极驱动集成电路

FAN7888 是单片三通道半桥栅极驱动 IC，设计用于高压、高速驱动 MOSFET 和 IGBT，工作电压高达 +200 V。Fairchild 的高压工艺和共模噪声消除技术可以保证高端驱动器在高 dv/dt 噪声环境下稳定工作。先进的电平转换电路使高端栅极驱动器能够耐受最高 VS = -9.8 V（典型值）（在 VBS = 15 V 条件下）当VDD和VBS小于指定阈值电压时，欠压闭锁(UVLO)电路可防止发生故障。输出驱动器的源电流/灌电流典型值分别为 350 mA/650 mA，适用于电机驱动系统的三相半桥应用。 • 自举工作通道浮动电压达到 +200 V \n• 所有通道的拉电流/灌电流驱动能力为350mA/650mA（典型值） \n• 3 半桥式栅极驱动器 \n• 将容许负向 VS摆幅扩展至 -9.8 V，用于 VBS= 15 V 时的信号传输\n• 匹配的最大传播延迟时间：50 ns\n• 兼容 3.3V 和 5V 输入逻辑 \n• 内置直通预防电路适用于带270ns典型死区时间的所有通道 \n• 内置共模dv/dt噪声消除电路\n• 所有通道内置UVLO功能;

3 Half-Bridge Gate-Drive IC

文件：1.75061 Mbytes Page：15 Pages

3 Half-Bridge Gate-Drive IC

Description The FAN7888 is a monolithic three half-bridge gate-drive IC designed for high-voltage, high-speed driving MOSFETs and IGBTs operating up to +200V. Features „Floating Channel for Bootstrap Operation to +200V „Typically 350mA/650mA Sourcing/Sinking Current Driving Capabilit

3 Half-Bridge Gate-Drive IC

Description The FAN7888 is a monolithic three half-bridge gate-drive IC designed for high-voltage, high-speed driving MOSFETs and IGBTs operating up to +200V. Features „Floating Channel for Bootstrap Operation to +200V „Typically 350mA/650mA Sourcing/Sinking Current Driving Capabilit

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 包装：散装 描述：IC GATE DRVR HALF-BRIDGE 20SOIC 集成电路（IC） 栅极驱动器

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC GATE DRVR HALF-BRIDGE 20SOIC 集成电路（IC） 栅极驱动器

3 Half-Bridge Gate-Drive IC

文件：1.75061 Mbytes Page：15 Pages

2.7V to 5.25 V Micropower 8-Channel 125 kSPS 12-Bit ADC in 16-Lead TSSOP

GENERAL DESCRIPTION The AD7888 is a high speed, low power, 12-bit ADC that operates from a single 2.7 V to 5.25 V power supply. The AD7888 is capable of a 125 kSPS throughput rate. The input track-and hold acquires a signal in 500 ns and features a single-ended sampling scheme. The AD7888 contain

2.7V to 5.25 V Micropower 8-Channel 125 kSPS 12-Bit ADC in 16-Lead TSSOP

GENERAL DESCRIPTION The AD7888 is a high speed, low power, 12-bit ADC that operates from a single 2.7 V to 5.25 V power supply. The AD7888 is capable of a 125 kSPS throughput rate. The input track-and hold acquires a signal in 500 ns and features a single-ended sampling scheme. The AD7888 contain

2.7V to 5.25 V Micropower 8-Channel 125 kSPS 12-Bit ADC in 16-Lead TSSOP

GENERAL DESCRIPTION The AD7888 is a high speed, low power, 12-bit ADC that operates from a single 2.7 V to 5.25 V power supply. The AD7888 is capable of a 125 kSPS throughput rate. The input track-and hold acquires a signal in 500 ns and features a single-ended sampling scheme. The AD7888 contain

2.7V to 5.25 V Micropower 8-Channel 125 kSPS 12-Bit ADC in 16-Lead TSSOP

GENERAL DESCRIPTION The AD7888 is a high speed, low power, 12-bit ADC that operates from a single 2.7 V to 5.25 V power supply. The AD7888 is capable of a 125 kSPS throughput rate. The input track-and hold acquires a signal in 500 ns and features a single-ended sampling scheme. The AD7888 contain

2.7V to 5.25 V Micropower 8-Channel 125 kSPS 12-Bit ADC in 16-Lead TSSOP

GENERAL DESCRIPTION The AD7888 is a high speed, low power, 12-bit ADC that operates from a single 2.7 V to 5.25 V power supply. The AD7888 is capable of a 125 kSPS throughput rate. The input track-and hold acquires a signal in 500 ns and features a single-ended sampling scheme. The AD7888 contain