USB-Compliant Single-Cell Li-Ion Switching Charger

Description The FAN5400 family (FAN540X) combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery. The charging parameters and operating modes are pro

符合 USB 标准的单锂离子电池开关充电器，带 USB-OTG 升压稳压器

FAN5404结合高度集成的开关模式充电器在最大程度上缩短USB电源的单体锂离子充电时间，结合升压调节器通过电池给USB外设供电。 通过操作速度高达3.4Mbps的I2C接口，可对充电参数和工作模式进行编程。 充电器电路和升压调节器电路切换到3MHz在最大程度上降低外部无源器件的大小。 FAN5404提供三相电池充电： 调节、恒定电流及恒定电压。 要确保符合USB规范并在最大程度上缩短充电时间，应将输入电流限定为通过I2C主机所设定的值。 充电是否终止由可编程最小电流决定。 带复位控制功能的安全定时器提供I2C主机的安全备份。 电池电量低于内部阀值时，集成电路(IC)自动重新开始充电周期。 如 • 用于单体锂离子和锂聚合物电池组的全集成高效充电器• 比线性充电器的充电速度更快• 充电电压精度：\n25°C时为0.5%\n0至125°C时为1%• ±5%输入电流调节精度• ±5%充电电流调节精度• 20V绝对最大输入电压• 6V最大输入工作电压• 1.25A最大充电速度• 可通过具有快速模式及其兼容性的高速I2C接口(3.4Mb/s)进行编程\n输入电流\n快速充电 / 终端电流\n充电器电压\n终端使能• 占空周期范围宽的3MHz同步降压PWM控制器• 小尺寸1µH外部电感• 带复位控制功能的安全定时器• 辅助电路的1.8V VBUS稳压输出• 由下降;

FAN5400 / FAN5401 / FAN5402 / FAN5403 / FAN5404 / FAN5405 USB-Compliant Single-Cell Li-Ion Switching Charger

文件：1.03496 Mbytes Page：37 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

支持电源路径和2.3A生产测试的USB-0TG、1.55A锂离子开关充电器

FAN5404X 系列产品包括 I2C 控制 1.55 A、兼容 USB 的开关模式充电器，支持电源路径运行和 USB OTG 升压运行。 该 IC 集成充电器，支持生产测试模式，为系统提供 4.2 V 电压，电流最高可达 2.3 A。为了促进系统快速启动，IC 包含一个电源路径电路，可以断开电池与系统轨道的连接，确保在连接 VBUS 后系统能够快速启动。 电源路径电路确保插入充电器时，系统轨道保持活跃状态，即使电池失效或短接时也能保持这种状态。通过操作速度高达 3.4 Mbps 的 I2C 接口，可对充电参数和工作模式进行编程。 充电器电路和升压调节器电路切换到 3 MHz 以最大程度地减小 用于单节锂离子和锂聚合物电池组的完全集成式高效率充电器\r\n连接 VBUS 时，电源路径电路确保在电池电量耗尽时系统能够快速启动\r\n1.55 A 最大充电电流\r\n浮动电压精度：\r\n25°C 时为 ±0.5%\r\n0 至 125°C 时为 ±1%\r\n±5% 输入和充电电流调节精度\r\n温度检测输入阻止自动充电，从而符合 JEITA 标准\r\n热调节和关断\r\n4.2 V、2.3 A 生产测试模式\r\n5 V、500 mA 升压模式，用于 USB OTG \r\n28 V 绝对最大输入电压\r\n6 V 最大输入工作电压\r\n可通过具有快速模式;

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

支持电源路径和2.3A生产测试的USB-0TG、1.55A锂离子开关充电器

FAN5404X 系列产品包括 I2C 控制 1.55 A、兼容 USB 的开关模式充电器，支持电源路径运行和 USB OTG 升压运行。 该 IC 集成充电器，支持生产测试模式，为系统提供 4.2 V 电压，电流最高可达 2.3 A。为了促进系统快速启动，IC 包含一个电源路径电路，可以断开电池与系统轨道的连接，确保在连接 VBUS 后系统能够快速启动。 电源路径电路确保插入充电器时，系统轨道保持活跃状态，即使电池失效或短接时也能保持这种状态。通过操作速度高达 3.4 Mbps 的 I2C 接口，可对充电参数和工作模式进行编程。 充电器电路和升压调节器电路切换到 3 MHz 以最大程度地减小 用于单节锂离子和锂聚合物电池组的完全集成式高效率充电器\r\n连接 VBUS 时，电源路径电路确保在电池电量耗尽时系统能够快速启动\r\n1.55 A 最大充电电流\r\n浮动电压精度：\r\n25°C 时为 ±0.5%\r\n0 至 125°C 时为 ±1%\r\n±5% 输入和充电电流调节精度\r\n温度检测输入阻止自动充电，从而符合 JEITA 标准\r\n热调节和关断\r\n4.2 V、2.3 A 生产测试模式\r\n5 V、500 mA 升压模式，用于 USB OTG \r\n28 V 绝对最大输入电压\r\n6 V 最大输入工作电压\r\n可通过具有快速模式;

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

Description The FAN5404X family includes I2C controlled 1.55 A USBcompliant switch-mode chargers with power path operation and USB OTG boost operation. Integrated with the charger, the IC supports production test mode, which provides 4.2 V at up to 2.3 A to the system. Features ■ Fully Integrat

USB-Compliant Single-Cell Li-Ion Switching Charger

Description The FAN5400 family (FAN540X) combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery. The charging parameters and operating modes are pro

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

封装/外壳：25-UFBGA，WLCSP 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BATT CHG LI-ION 1CELL 25WLCSP 集成电路（IC） 电池充电器

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

封装/外壳：25-UFBGA，WLCSP 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BATT CHG LI-ION 1CELL 25WLCSP 集成电路（IC） 电池充电器

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

USB-OTG, 1.55 A, Li-Ion Switching Charger with Power Path and 2.3 A Production Test Support

文件：1.51322 Mbytes Page：40 Pages

Hex Inverting Gates

文件：107.16 Kbytes Page：6 Pages

Hex Inverting Gates

文件：107.16 Kbytes Page：6 Pages

Hex Inverting Gates

文件：107.16 Kbytes Page：6 Pages

Hex Inverting Gates

文件：107.16 Kbytes Page：6 Pages

Hex Inverting Gates

文件：107.16 Kbytes Page：6 Pages