10 WATTS SINGLE & DUAL OUTPUT DC/DC INDUSTRIAL

文件：493.48 Kbytes Page：2 Pages

ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS

文件：622.9 Kbytes Page：6 Pages

包装：散装 描述：BATTERY CONTACT SPRING AAA 电池产品 电池座，电池夹，电池触头

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

SMD PPTC RESETTABLE FUSE

Product Features: Small surface mountable, Solid state, Faster time to trip than standard SMD devices, Lower resistance than standard SMD devices

SMD PPTC RESETTABLE FUSE

Product Features: Small surface mountable, Solid state, Faster time to trip than standard SMD devices, Lower resistance than standard SMD devices

SMD PPTC RESETTABLE FUSE

Product Features: Small surface mountable, Solid state, Faster time to trip than standard SMD devices, Lower resistance than standard SMD devices

SMD PPTC RESETTABLE FUSE

Product Features: Small surface mountable, Solid state, Faster time to trip than standard SMD devices, Lower resistance than standard SMD devices

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

High-Gain Broadband RF Amplifier 600MHz to 5000MHz

Features  RF Range: 600MHz to 5000MHz  Noise Figure = 2.3dB at 2600MHz  Gain = 17.3dB at 2600MHz  OIP3 = +40dBm at 2600MHz  Output P1dB = +21dBm at 2600MHz  Near-Constant Gain versus Temperature  3.3V or 5V Power Supply  ICC = 70mA  2mA Standby Current  350mW Typical DC Power a

High-Gain Broadband RF Amplifier 600MHz to 5000MHz

Features  RF Range: 600MHz to 5000MHz  Noise Figure = 2.3dB at 2600MHz  Gain = 17.3dB at 2600MHz  OIP3 = +40dBm at 2600MHz  Output P1dB = +21dBm at 2600MHz  Near-Constant Gain versus Temperature  3.3V or 5V Power Supply  ICC = 70mA  2mA Standby Current  350mW Typical DC Power a

High-Gain Broadband RF Amplifier 600MHz to 5000MHz

Features  RF Range: 600MHz to 5000MHz  Noise Figure = 2.3dB at 2600MHz  Gain = 17.3dB at 2600MHz  OIP3 = +40dBm at 2600MHz  Output P1dB = +21dBm at 2600MHz  Near-Constant Gain versus Temperature  3.3V or 5V Power Supply  ICC = 70mA  2mA Standby Current  350mW Typical DC Power a

High-Gain Broadband RF Amplifier 600MHz to 5000MHz

Features  RF Range: 600MHz to 5000MHz  Noise Figure = 2.3dB at 2600MHz  Gain = 17.3dB at 2600MHz  OIP3 = +40dBm at 2600MHz  Output P1dB = +21dBm at 2600MHz  Near-Constant Gain versus Temperature  3.3V or 5V Power Supply  ICC = 70mA  2mA Standby Current  350mW Typical DC Power a

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Dual Matched Broadband RF DVGA 400MHz to 2700MHz

Features  Dual Path RF amp and DSAs for Diversity / MIMO Receivers  RF: 400MHz to 2700MHz 

Dual Matched Broadband RF DVGA 400MHz to 2700MHz

Features  Dual Path RF amp and DSAs for Diversity / MIMO Receivers  RF: 400MHz to 2700MHz 

Dual Matched Broadband RF DVGA 400MHz to 2700MHz

Features  Dual Path RF amp and DSAs for Diversity / MIMO Receivers  RF: 400MHz to 2700MHz 

Dual Matched Broadband RF DVGA 400MHz to 2700MHz

Features  Dual Path RF amp and DSAs for Diversity / MIMO Receivers  RF: 400MHz to 2700MHz 

Dual Matched Broadband RF DVGA 400MHz to 2700MHz

Features  Dual Path RF amp and DSAs for Diversity / MIMO Receivers  RF: 400MHz to 2700MHz 

Dual Matched Broadband RF DVGA 3.3GHz to 4.2GHz

Features ■ RF Frequency Range: 3.3GHz to 4.2GHz ■ Dual Channel RF amp and DSAs for Diversity / MIMO Receivers ■

Dual Matched Broadband RF DVGA 3.3GHz to 4.2GHz

Features ■ RF Frequency Range: 3.3GHz to 4.2GHz ■ Dual Channel RF amp and DSAs for Diversity / MIMO Receivers ■

Dual Matched Broadband RF DVGA 3.3GHz to 4.2GHz

Features ■ RF Frequency Range: 3.3GHz to 4.2GHz ■ Dual Channel RF amp and DSAs for Diversity / MIMO Receivers ■

Dual Matched Broadband RF DVGA 3.3GHz to 4.2GHz

Features ■ RF Frequency Range: 3.3GHz to 4.2GHz ■ Dual Channel RF amp and DSAs for Diversity / MIMO Receivers ■

Dual Matched Broadband RF DVGA 3.3GHz to 4.2GHz

Features ■ RF Frequency Range: 3.3GHz to 4.2GHz ■ Dual Channel RF amp and DSAs for Diversity / MIMO Receivers ■

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz

Features  Gain at 2.6GHz • 34dB typical in High Gain Mode • 28dB typical in Low Gain Mode  1.5dB NF at 2.6GHz  +23dBm OIP3 at 2.6GHz  OP1dB at 2.6GHz • +15dBm in High Gain Mode • +14dBm in Low Gain Mode  50Ω single-ended input / output amplifier impedances  IDD = 130mA  Independe

Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz

Features  Gain at 2.6GHz • 34dB typical in High Gain Mode • 28dB typical in Low Gain Mode  1.5dB NF at 2.6GHz  +23dBm OIP3 at 2.6GHz  OP1dB at 2.6GHz • +15dBm in High Gain Mode • +14dBm in Low Gain Mode  50Ω single-ended input / output amplifier impedances  IDD = 130mA  Independe

Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz

Features  Gain at 2.6GHz • 34dB typical in High Gain Mode • 28dB typical in Low Gain Mode  1.5dB NF at 2.6GHz  +23dBm OIP3 at 2.6GHz  OP1dB at 2.6GHz • +15dBm in High Gain Mode • +14dBm in Low Gain Mode  50Ω single-ended input / output amplifier impedances  IDD = 130mA  Independe

Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz

Features  Gain at 2.6GHz • 34dB typical in High Gain Mode • 28dB typical in Low Gain Mode  1.5dB NF at 2.6GHz  +23dBm OIP3 at 2.6GHz  OP1dB at 2.6GHz • +15dBm in High Gain Mode • +14dBm in Low Gain Mode  50Ω single-ended input / output amplifier impedances  IDD = 130mA  Independe

Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz

Features  Gain at 2.6GHz • 34dB typical in High Gain Mode • 28dB typical in Low Gain Mode  1.5dB NF at 2.6GHz  +23dBm OIP3 at 2.6GHz  OP1dB at 2.6GHz • +15dBm in High Gain Mode • +14dBm in Low Gain Mode  50Ω single-ended input / output amplifier impedances  IDD = 130mA  Independe

Dual Path RF Switch with LNA and DVGA 3300MHz to 4000MHz

Description The F0453B is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0453B supports frequencies from 3300MHz to 4000MHz. The F0453B provides 34.5dB gain

Dual Path RF Switch with LNA and DVGA 3300MHz to 4000MHz

Description The F0453B is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0453B supports frequencies from 3300MHz to 4000MHz. The F0453B provides 34.5dB gain

Dual Path RF Switch with LNA and DVGA 3300MHz to 4000MHz

Description The F0453B is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0453B supports frequencies from 3300MHz to 4000MHz. The F0453B provides 34.5dB gain

Dual Path RF Switch with LNA and DVGA 3300MHz to 4000MHz

Description The F0453B is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0453B supports frequencies from 3300MHz to 4000MHz. The F0453B provides 34.5dB gain

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

Fuse Blocks and Clips - For 3AG Fuses

Fuse Blocks and Clips - For 3AG Fuses 3AG Screw Terminal Laminated Base Type

DAMPER DIODE

Features • High voltage and high reliability • High speed switching • Low forward voltage Applications • Suitable for damper diode in horizontal deflection circuits

ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS

文件：622.9 Kbytes Page：6 Pages

CCM/AT-0307-471 manufacturing location and 12NC change

文件：171.8 Kbytes Page：1 Pages

New reference numbers (12NC) and order data of Wideband chokes (WBC)

文件：295.08 Kbytes Page：3 Pages

L16 PL T10 M GRN

文件：27.67 Kbytes Page：1 Pages

L16PLT10HGRNGRN

文件：137.46 Kbytes Page：1 Pages

L16 PL T10 K RED RED TRANSPARENT/FLAT LENS

文件：48.77 Kbytes Page：1 Pages

L16PLT10LGRN

文件：123.89 Kbytes Page：1 Pages

L16 PL T 10 A WHT

文件：27.73 Kbytes Page：1 Pages

L16PLT10FREDRED

文件：124.2 Kbytes Page：1 Pages

L16 PL S10 J GRN GRN

文件：29.16 Kbytes Page：1 Pages

L16 PL S10 K YEL YEL

文件：29.16 Kbytes Page：1 Pages

L16 PL S10 B RED

文件：29.18 Kbytes Page：1 Pages

L16 PL S10 K RED RED

文件：29.25 Kbytes Page：1 Pages

L16PLS10JREDRED

文件：136.17 Kbytes Page：1 Pages

L16 PL R10 C ORG

文件：42.4 Kbytes Page：1 Pages