GENERAL DESCRIPTION

The XRT83VSH28 is a fully integrated 8-channel short-haul line interface unit (LIU) that operates from a 1.8V and a 3.3V power supply. Using internal termination, the LIU provides one bill of materials to operate in E1 75Ω or 120Ω mode with minimum external components. The LIU features are programmed through a standard parallel or serial microprocessor interface. EXAR’s LIU has patented high impedance circuits that allow the transmitter outputs and receiver inputs to be high impedance when experiencing a power failure or when the LIU is powered off. Key design features within the LIU optimize 1:1 or 1+1 redundancy and non-intrusive monitoring applications to ensure reliability without using relays.

FEATURES

• Fully integrated eight channel short-haul transceivers for E1 (2.048MHz) applications

• Internal Impedance matching on both receive and transmit for 75Ω (E1) and 120Ω (E1) applications are per port selectable through software without changing components

• Power down on a per channel basis with independent receive and transmit selection

• User programable Arbitrary Pulse mode

• On-Chip transmit short-circuit protection and limiting protects line drivers from damage on a per channel basis

• Selectable Crystal-Less digital jitter attenuators (JA) with 32-Bit or 64-Bit FIFO for the receive or transmit path

• Driver failure monitor output (DMO) alerts of possible system or external component problems

• Transmit outputs and receive inputs may be High impedance for protection or redundancy applications on a per channel basis

• Support for automatic protection switching

• 1:1 and 1+1 protection without relays

• Receive monitor mode handles 0 to 6dB resistive attenuation (flat loss) along with 0 to 6dB cable loss

• Loss of signal (RLOS) according to ITU-T G.775/ETS300233 (E1)

• Programmable data stream muting upon RLOS detection

• On-Chip HDB3 encoder/decoder with an internal 16-bit LCV counter for each channel

• On-Chip digital clock recovery circuit for high input jitter tolerance

• QRSS/PRBS pattern generator and detection for testing and monitoring

• Error and bipolar violation insertion and detection

APPLICATIONS

• ISDN Primary Rate Interface

• CSU/DSU E1 Interface

• E1 LAN/WAN Routers

• Public switching Systems and PBX Interfaces

• E1 Multiplexer and Channel Banks