1. Features

Display resolution options:

480(RGB) (H) X 864 (V)

480(RGB) (H) X 854 (V)

480(RGB) (H) X 800 (V)

480(RGB) (H) X 720 (V)

480(RGB) (H) X 640 (V)

Display color modes

Full color mode:

16.7M colors (24-bit data, R: 8-bit, G: 8-bit, B: 8-bit)

Reduced color modes:

262K colors (18-bit data, R: 6-bit, G: 6-bit, B: 6-bit)

65K colors (16-bit data, R: 5-bit, G: 6-bit, B: 5-bit)

Display module

Supports 1441 source channel outputs

Supports gate control signals to gate driver in the panel

Supports 2-dot / column inversion

Gamma correction (1 preset Gamma curve)

On module VCOM control (DDVDL+0.3V to 0V common electrode output voltage range)

Interface types

MIPI-DSI (Display Serial Interface) interface

Supports one data lane / maximum speed 850Mbps or

Supports two data lanes / maximum speed 500Mbps

Supports DSI version 1.02.00

Supports D-PHY version 1.00.00

Supports DCS version 1.02.00

MIPI-DPI (Display Pixel Interface) interface

16 bit/pixel (R: 5-bit, G: 6-bit, B: 5-bit)

18 bit/pixel (R: 6-bit, G: 6-bit, B: 6-bit)

24 bit/pixel (R: 8-bit, G: 8-bit, B: 8-bit)

3 line-9bit SPI (Serial Peripheral Interface) interface

Power saving mode:

Deep-standby mode

Sleep mode

Other on-chip functions / Miscellaneous

Supports inversion mode

Software programmable color depth mode

Supports DC VCOM driving

DC VCOM voltage generator and adjustment

OTP (One-Time Programming) memory store initialization register settings

Provide 3 times OTP to store DC VCOM value setting, ID setting

Supports CABC (Content Adaptive Brightness Control) function

Separate RGB Gamma correction

Supports 3-Gamma DGC (Digital Gamma Correction) function

Color enhancement function

Supports control the ILI4002 and ILI4003 IC

VGHO/VGLO voltage generator for gate control signal in panel

Supports gate control signals to gate driver in panel (GIP)

Input power

I/O supply voltage range for IOVCC to DGND = 1.65V ~ 3.6V

Analog supply voltage range for VCI/VCIR/VCIP to AGND/DGND/CGND/VSSR1/VSSR2/VSSR3

= 2.5V ~ 3.6V

OTP programming voltage, VPP = 5.0V

Source/VCOM/Gate power supply voltage

DDVDH-AGND=4.75 to 6.5V (Step-up 1 output voltage range)

DDVDL-AGND = -6.5 to -4.75V (Step-up 2 output voltage range)

VCL-AGND = -1 X VCIP (Step-up 3 output voltage range)

DC VCOM = -4.0V to 0V, a step 12.5mV (Common electrode voltage range)

VREG1OUT= 3.0V to 6.1875V (DDVDH-0.3V) (Positive gamma high voltage range)

VREG2OUT= -3.0V to -6.1875V (DDVDL+0.3V) (Negative gamma high voltage range)

VGH-AGND = 8.0V to 18.0V (Positive gate driver output voltage range)

VGL-AGND = -8.0V to -18.0V (Negative gate driver output voltage range)

VGL_REG-AGND = -7.0 to -15.5V (Negative gate driver output voltage range)

VGH_REG-AGND = 8.5V to 16.0V (Positive gate driver output voltage range)