General Description

The ID7T6036 is a three-phase gate drive IC which can be used to drive N-channel power MOSFETs or

IGBTs in the high side configuration which operates up to 600V. Logic inputs are compatible with CMOS or

LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived

from an external current sense resistor. An enable function is available to terminate all six outputs

simultaneously. An open-drain FAULT signal is provided to indicate that an over-current or under-voltage

shutdown has occurred. Over-current fault conditions are cleared automatically after a delay programmed

externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current

buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify

use in high frequency applications.

Features

 Operation to +600 V

 Typically 200mA/350mA Source/Sink current

 3.3 V/5V/15V input logic compatible

 dV/dt Immunity ±50 V/nsec

 Typically - 9V negative Vs bias capability

 Gate drive supply range from 10 V to 20 V

 UVLO for all channels

 Cross-conduction prevention logic

 Over-current shutdown turns off all six drivers

 Externally adjustable Fault-clear timing

 Built-in advanced input filter

 Matched propagation delay for all channels

Applications

 Sewing Machine/Power Toll

 Air Conditioners/ Washing Machines

/Refrigerator

 General Purpose Inverters